Husqvarna 525iLST Owner Manual - Page 11
WARNING, Safety instructions for assembly, Safety instructions for maintenance
View all Husqvarna 525iLST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To do a check of the cutting attachment guard WARNING: Do not use a cutting attachment without an approved and correctly attached cutting attachment guard. Always use the recommended cutting attachment guard for the cutting attachment that you use, see Accessories on page 20. If an incorrect or faulty cutting attachment guard is attached, it can cause serious personal injury. The cutting attachment guard stops objects that eject in the direction of the operator. The cutting attachment guard also prevents injuries that can occur if you touch the cutting attachment. 1. Stop the motor. 2. Do a visual check for damages, for example cracks. 3. Replace the cutting attachment guard if it is damaged. Trimmer head • Always use the correct trimmer head, cutting attachments and always use the recommended trimmer line. Refer to Accessories on page 20 and the assembly in the end of the Manual. • Make sure that the cutter on the trimmer guard is not damaged. • Make sure that the trimmer line is wound tightly and equally around the drum to prevent unusual vibrations from the product. Different cord lengths can result in vibrations that are not necessary. Tap the trimmer head to get correct length on the cord. To increase the life of the cord it can be soaked in water for 2 days or more before assembly. This will make the cord more resistant. Safety instructions for assembly WARNING: Read this power unit manual together with approved accessory manual. • Remove the battery from the product before you assemble the product. • Use approved protective gloves. • A defective or incorrect guard can cause injury. Do not use a cutting attachment that does not have an approved guard attached. • Make sure that you assemble the cover and shaft correct before you start the product. • If a harness is supplied with the attachment, the harness must be correctly attached to the product. The harness makes operation safe and prevents injury to the operator or other persons. Safety instructions for maintenance WARNING: Read the warning instructions that follow before you do maintenance on the product. • Remove the battery before you do maintenance, other checks or assemble the product. • The operator must only do the maintenance and servicing shown in this operator's manual. Turn to your servicing dealer for maintenance and servicing of a larger extension. • Do not clean the battery or the battery charger with water. Strong detergent can cause damage to the plastic. • If you do not do maintenance, it decreases the life cycle of the product and increases the risk of accidents. • Special training is necessary for all servicing and repair work, especially for the safety devices on the product. If not all checks in this operator's manual are approved after you have done maintenance, turn to your servicing dealer. We guarantee that there are professional repairs and servicing available for your product. • Only use original spare parts. • Always use heavy duty gloves when you repair the cutting attachment. The blades are very sharp and can easily cause injuries. 1920 - 001 - 28.11.2022 11