Husqvarna HU775L Operation Manual - Page 8
To Adjust Cutting Height, To Convert Mower - lowes
View all Husqvarna HU775L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATION TO ADJUST CUTTING HEIGHT Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. 1. To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting (Figure 9). NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs. LEVER BACKWARD TO LOWER MOWER 2 TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging: REAR BAGGING 1. Lift rear door of the lawn mower and place the grass catcher frame hooks onto the grass bag brackets (Figure 10). 2. To convert to mulching operation, remove grass catcher and close rear door. 2 3 1 4 LEVER FORWARD TO RAISE MOWER Figure 9 1. Plate tab 2. Lever 1 Figure 10 1. Grass catcher frame hook 2. Rear door 3. Grass bag bracket 4. Grass catcher handle 8