Husqvarna LE121P Owner Manual - Page 14
To start the product, To use the drive on the wheels LE, To use the SavE function
View all Husqvarna LE121P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Battery charging status A Husqvarna Li-ion battery can be charged or used at all charging levels. The battery is not damaged. A fully charged battery will not decrease its charge when the battery is left in the charger. LED display Charging status LED 1 flashes 0%-25% LED 1 is lit, LED 2 flashes 25%-50% LED 1, LED 2 are lit, LED 50%-75% 3 flashes LED 1, LED 2, LED 3 are 75%-100% lit, LED 4 flashes LED 1, LED 2, LED 3, LED 4 are lit Fully charged 5. Loosen the start inhibitor. 6. Push the motor brake handle in the direction of the handlebar. To start the product 1. Put a charged battery in battery compartment number 1 below the battery lid. For longer operation time, put a second charged battery in battery compartment number 2. 2. Turn the safety key to 1. To use the drive on the wheels (LE 221R) • Pull the drive bail in the direction of the handlebar to start the drive. 3. Stay behind the product. 4. Press the ON/OFF button (A) on the control panel and the green LED (B) comes on. A • Press + and - on the control panel to set the drive speed in 4 steps. • Release the drive bail to disengage the drive, for example when you go near an obstacle. B To use the SavE function The product has a battery saving function (SavE) that gives longer operation time. 14 428 - 002 -