Husqvarna PZ6029D Owners Manual - Page 43

Drive Lever Adjustment, Height Adjustment, Alignment

Get Husqvarna PZ6029D PDF manuals and user guides View all Husqvarna PZ6029D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

maintenance Drive Lever Adjustment Drive levers can be adjusted up and down and side to side to suit the operator. Height Adjustment Alignment adjustments will be needed after adjusting the height. Make adjustments with the unit turned off. 1. Remove the bolts securing the drive levers to the control assembly. 2. Position the drive lever at the desired height and reinstall the bolts, but do not fully tighten the bolts at this time. Alignment To align the drive levers uniformly, rotate both drive levers inward and press both levers all of the way forward. 1. Rotate the drive levers in the upper slots of the lever until the levers are aligned with each other. Tighten bolts on each drive lever securely. 1 1. Drive levers 2. Control assembly 3. Alignment slot Neutral adjustment 1 3 2 8065-049 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
1
1
2
3
MAINTENANCE
43
8065-049
1. Drive levers
2. Control assembly
3. Alignment slot
Neutral adjustment
Drive Lever Adjustment
Drive levers can be adjusted up and down and side to
side to suit the operator.
Height Adjustment
Alignment adjustments will be needed after adjusting
the height. Make adjustments with the unit turned off.
1.
Remove the bolts securing the drive levers to the
control assembly.
2.
Position the drive lever at the desired height and
reinstall the bolts, but do not fully tighten the bolts
at this time.
Alignment
To align the drive levers uniformly, rotate both drive
levers inward and press both levers all of the way
forward.
1.
Rotate the drive levers in the upper slots of the
lever until the levers are aligned with each other.
Tighten bolts on each drive lever securely.