Husqvarna ST 124 Owner Manual - Page 13
To operate the product, To stop the product, To get a good result, Pull out the on/off key.
View all Husqvarna ST 124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To operate the product 1. Squeeze the auger engagement to the handle to engage the auger and throw snow. 1. Release the drive engagement to stop the drive wheels. 2. Release the auger engagement to disengage the auger and stop throwing snow. 2. Move the drive speed control lever to the left to operate the product forward. Move the drive speed control lever to the right to operate the product rearward. 3. Turn the fuel switch to the OFF position. 3. Operate the drive engagement with the right handle. 4. Squeeze the drive engagement to the handle to engage the drive wheels. The product moves forward or reverse depending on the location of the drive speed control lever. 4. Pull out the on/off key. To stop the product Note: To turn the engine off in an emergency, pull out the on/off key. To get a good result • Always run the engine at full throttle or near full throttle. • Always adapt the speed of the product to the snow situation and adjust the speed with the drive speed control lever. Make sure that the product throws snow evenly. • It is easier and more efficient to remove snow immediately after it falls. • Always throw snow downwind whenever possible. 1272 - 003 - 09.08.2019 13