IBM 8874 Installation Guide - Page 90
system-error
UPC - 000435813008
View all IBM 8874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Lit light path diagnostics LED with the system-error LED also lit Description Action CPU A microprocessor has failed, is missing, or has been improperly installed. Note: Make sure that the microprocessors are installed in the correct sequence; see "Installing an additional microprocessor" on page 15. 1. Check the BMC log or the system-error log to determine the reason for the lit LED. 2. Find the failing, missing, or mismatched microprocessor by checking the LEDs on the microprocessor tray. 3. Reseat the following components: a. (Trained service technician only) Failing microprocessor b. Microprocessor tray 4. Replace the following components one at a time, in the order shown, restarting the server each time: a. (Trained service technician only) Failing microprocessor b. (Trained service technician only) Microprocessor tray VRM A dc-dc regulator has failed or is missing. 1. Check the BMC log or the system-error log to determine the reason for the lit LED (for a VRM). 2. Find the failing or missing VRM by checking the LEDs on the microprocessor tray. 3. Install any missing VRMs. 4. Reseat the following components: a. Failing VRM b. (Trained service technician only) Microprocessor associated with the VRM c. Microprocessor tray 5. Replace the following components one at a time, in the order shown, restarting the server each time: a. Failing VRM b. (Trained service technician only) Microprocessor associated with the VRM c. (Trained service technician only) Microprocessor tray LOG Information is present in the BMC 1. Save the log if necessary and clear. log and system-error log. One or both logs might be full or almost full. 2. Check the log for possible errors. 78 IBM xSeries 460 Type 8872 and xSeries MXE 460 Type 8874: Installation Guide ERserver