IBM 9228 User Guide - Page 57
Class 1 Laser Product, Laser Klasse 1, Laser Klass 1, Luokan 1 Laserlaite, Appareil A Laser de
![]() |
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Statement 3: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. DANGER Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following. Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Class 1 Laser Product Laser Klasse 1 Laser Klass 1 Luokan 1 Laserlaite Appareil A` Laser de Classe 1 7. Touch the static-protective package that contains the drive to any unpainted metal surface on the computer; then, remove the drive from the package and place it on a static-protective surface. 8. Set any jumpers or switches on the drive according to the documentation that comes with the drive. Note: You might find it easier to install the new drive from the front and then attach the cables. 9. Install the drive in bay 2 or bay 3. To install the drive in bay 2, complete the following steps: a. Remove the drive retainer clip from the side of the drive cage of bays 1, 2, and 3 (see the illustration at the beginning of this section). Slide the drive retainer clip to the left to disengage it from the drive cage; then, snap the drive retainer clip into the screw holes on the side of the drive (the blue side of the drive retainer clip should be facing outward). b. If you are installing a 5.25-in. drive in bay 2, push the drive into the drive bay until it snaps in place. If you are installing a 3.5-in. drive in bay 2, attach the 5.25-in. conversion kit and push the drive into the drive bay until it snaps in place. Chapter 4. Installing options 45
![](/manual_guide/products/ibm-9228-user-guide-afd3cf8/57.png)