IBM 9228 User Guide - Page 66
Vacuum tool, Microprocessor, Socket
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
9. If the second microprocessor socket is covered with protective film or a label, peel and remove the film or label. 10. Touch the static-protective package containing the new microprocessor to any unpainted metal surface on the computer; then, remove the microprocessor from the package. 11. Make sure that the microprocessor socket lever and cover are in the fully open position. Attention: To install the second microprocessor, use the vacuum tool that comes with the new microprocessor. Dropping the microprocessor during installation can damage the contacts. Also, contaminants on the microprocessor contacts, such as oil from your skin, can cause connection failures between the contacts and the socket. Vacuum tool Microprocessor Socket 12. Install the microprocessor: a. Squeeze and hold the bladder of the vacuum tool; then, place the suction cup on the microprocessor and release the bladder. Note: To maintain the correct orientation between the microprocessor and the microprocessor socket during installation, observe the following information: v The microprocessor has two notches that are keyed to two tabs on the sides of the socket. v A triangle-shaped indicator on one corner of the microprocessor points to a 45-degree angle on one corner of the socket. b. Using the vacuum tool, carefully place the microprocessor into the socket. c. Squeeze the bladder of the vacuum tool to release the microprocessor from the suction cup. 13. Close the microprocessor bracket frame; then, close the microprocessor retention latch and lock it securely in place. 54 IBM IntelliStation Z Pro Type 9228: User's Guide