IBM 9228 User Guide - Page 71
Replacing, cover, Connecting, external, options
![]() |
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Replacing the side cover To replace the side cover, complete the following steps: 1. Make sure that all cables, adapters, and other components are installed and seated correctly and that you have removed all work tools or spare parts from inside the computer. 2. Install the side cover by placing it into position on the computer. Insert the tabs inside the cover into the slots on the chassis. Note: Make sure that each tab on the side cover is in its corresponding slot before closing the cover-release latch. 3. Close the cover-release latch to secure the side cover in place. 4. Lock the side cover, if you unlocked it during removal. 5. Reconnect the external cables and power cords to the computer; then, connect the power cords to electrical outlets. 6. Turn on the attached devices; then, turn on the computer. Connecting external options You can connect a number of optional external devices to the connectors on the rear and front of the computer. To connect an external device, complete the following steps: 1. Read the safety information that begins on page v, the "Installation guidelines" on page 29, and the documentation that comes with the device. 2. Turn off the computer and all attached devices (see "Turning off the computer" on page 18). Chapter 4. Installing options 59
![](/manual_guide/products/ibm-9228-user-guide-afd3cf8/71.png)