IBM 9513AG1 User Guide

IBM 9513AG1 - T 55A - 15" LCD Monitor Manual

Get IBM 9513AG1 - T 55A - 15inch LCD Monitor PDF manuals and user guides
UPC - 087944454298
View all IBM 9513AG1 manuals
Add to My Manuals
Save this manual to your list of manuals

IBM 9513AG1 manual content summary:

  • IBM 9513AG1 | User Guide - Page 1
    Flat Panel Monitor 15.0 inch(381mm) TFT LCD 1024 x 768 Addressability 16.7 Million Colors TCO 95 User Guide Guide de l'utiliseur Benutzerhandbuch Manual del usuario Manuale per l'utente T55A Type 9513
  • IBM 9513AG1 | User Guide - Page 2
    you may need to vary the setup procedures. For more information, refer to your computer or operating system manuals or consult your system administrator or dealer. Ces instructions de configuration d'exploitation s'appliquent aux environnements d'utilisation types. Les messages affichés à l'écran
  • IBM 9513AG1 | User Guide - Page 3
    . • Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets. • To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible. DANGER Pour éviter les
  • IBM 9513AG1 | User Guide - Page 4
    dient goed toegankelijk te zijn. PELIGRO Para evitar riesgos de descargas eléctricas: • No retire bajo ningún concepto las cubiertas. • No maneje el monitor sin antes acoplar el soporte. • No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta eléctrica. • El cable de
  • IBM 9513AG1 | User Guide - Page 5
    eléctrica devidamente ligada à terra. • Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas devidamente ligadas à terra. • Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada eléctrica. A tomada eléctrica deve ser de fácil
  • IBM 9513AG1 | User Guide - Page 6
    VAARA Sähköiskun vaaran välttämiseksi: • Älä avaa laitteen kansia missään tilanteessa. • Älä käytä laitetta, ellei jalustaa ole kiinnitetty. • Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana. • Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun
  • IBM 9513AG1 | User Guide - Page 7
    98 or Windows NT . . . . . 9 Auto Setup OS/2 11 Manual Setup 13 Adjusting Your LCD Monitor 14 User controls 14 On-screen display (OSD) controls 16 Further Information 19 Display modes 19 Power Management 20 Troubleshooting 21 Further Help 23 Specifications 26 Compliances I Warranty IV
  • IBM 9513AG1 | User Guide - Page 8
    This monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or VGA 640 x 480 at 60 Hz. Workplace Preparation This section gives advice on what you should consider before you set up your monitor. Height The monitor
  • IBM 9513AG1 | User Guide - Page 9
    combinations which can help you to view in comfort. See the User controls section on page 14 for more information. Handling Instructions Do not support the monitor 1. Lift the monitor by placing both hands under the lower part of the cover. within the screen area. The Liquid Crystal Display is glass
  • IBM 9513AG1 | User Guide - Page 10
    the power source and your computer. 2. Switch on your monitor by pushing and releasing the power switch marked . To switch off your monitor, push and release the power switch again. 3. Turn on the monitor and then the computer. 4. Run AUTO SETUP by following the instructions in the Configuring your
  • IBM 9513AG1 | User Guide - Page 11
    . • Remove finger marks and grease with a damp cloth and mild detergent; do not use solvents or abrasives. • Never use flammable cleaning material to clean your IBM monitor or any other electrical apparatus. 5 JAPANESE COMPL & WARR
  • IBM 9513AG1 | User Guide - Page 12
    ). This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing. After you perform AUTO SETUP, the settings are stored and used each time you turn on the monitor. The Automatic Setup instructions require the monitor to be warmed up for
  • IBM 9513AG1 | User Guide - Page 13
    instructions. You may choose to run AUTO SETUP for each operating system that you use. This means that if you sometimes use your monitor the setup diskettes shipped with the monitor, refer to Manual Setup on page 13 The monitor. 2. Make sure the PC's video mode is set in the range of the supported
  • IBM 9513AG1 | User Guide - Page 14
    the flicker is minimised, or adjust it manually by following Manual Setup on page 13. 8 1. Turn on the monitor first; then the PC. If the supported display mode is selected for your PC. 2. Wait approximately 15 minutes, until the monitor warms up. 3. Insert the diskette labelled 'IBM Monitor
  • IBM 9513AG1 | User Guide - Page 15
    installed. • the correct supported display mode is selected for your PC. 2. Wait approximately 15 minutes, until the monitor warms up. 3. Drag the to the bottom of the screen. 4. Insert the diskette labelled 'IBM Monitor Installation Disk' into the diskette drive. The size and diversity of the
  • IBM 9513AG1 | User Guide - Page 16
    10. Press the ESC key to return to Windows. You have completed the monitor setup for Windows. If you use other operating systems, perform the appropriate AUTO SETUP for those systems, also: see Auto Setup OS/2 on page 11 and Auto Setup for DOS on page 8. 10
  • IBM 9513AG1 | User Guide - Page 17
    properly. • the correct video adapter card is installed. • the correct supported display mode is selected for your PC. 2. Wait approximately 15 minutes, until the monitor warms up. 3. Insert the diskette labelled 'IBM Monitor Installation Disk' into the diskette drive. 4. Select OS/2 SYSTEM, SYSTEMS
  • IBM 9513AG1 | User Guide - Page 18
    following Manual Setup on page 13. 16. When finished, the OSD main menu returns. Press the Exit button to exit from the OSD. 17. Press the ESCAPE key to return to the OS/2 Window. You have completed the monitor setup for OS/2. If you use other operating systems, perform the appropriate AUTO
  • IBM 9513AG1 | User Guide - Page 19
    is still distorted after you perform AUTO SETUP or the setup diskette does not run on your system, perform MANUAL SETUP. 1. Have your monitor turned on for about 15 minutes, until the monitor warms up. 2. Display the image you most frequently use on the screen. 3. Press the OSD Enter button the
  • IBM 9513AG1 | User Guide - Page 20
    to highlight icons and other options Displays the OSD main menu Enters menus and sub-menus and selects the highlighted option Power Switch Switches the monitor on and off The image is already optimized for many display modes, however the user controls can be used to adjust the image to your
  • IBM 9513AG1 | User Guide - Page 21
    ENGLISH FRANÇAIS DEUTSCH ESPAÑOL OSD Lock / Unlock This feature allows you to secure the current control settings, while allowing the user to adjust Brightness and Contrast, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by using the same procedure.
  • IBM 9513AG1 | User Guide - Page 22
    it on each day. Thus, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm up (be On) for at least 15 minutes before making any screen adjustments. This can be done automatically or manually. Automatic NO - Does not make the adjustment YES - Automatic adjustment 16
  • IBM 9513AG1 | User Guide - Page 23
    FRANÇAIS DEUTSCH OSD Icon Display Size Image Position Description Sub-menu(s) Manual • Fine • Coarse If your computer or video board supplies a signal rate and addressability lower than 1024 × 768, this LCD monitor provides a scaling processor that can expand the addressability up to 1024 × 768
  • IBM 9513AG1 | User Guide - Page 24
    or video board. The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Changes the position of the OSD on the screen. H-POSITION V-POSITION Controls and Adjustments Increases or decreases greenness Increases or decreases blueness NO
  • IBM 9513AG1 | User Guide - Page 25
    ENGLISH FRANÇAIS DEUTSCH ESPAÑOL Display modes Further Information The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. The image size, position and shape may change when the
  • IBM 9513AG1 | User Guide - Page 26
    as described in the table below. configured the computer, preferably to 1024 x 768 at 60Hz. As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. IBM recommends that you switch off your monitor at the end of each working day, or
  • IBM 9513AG1 | User Guide - Page 27
    Troubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. Problem Management software on your computer Connecting your Monitor section on page 4
  • IBM 9513AG1 | User Guide - Page 28
    Check that the signal cable is firmly connected to the computer. Check that no pins are bent in the signal cable connector. Reconfigure the computer to use a supported display mode. Connecting your Monitor section on page 4 Further Information section on page 19 Screen is blank and power indicator
  • IBM 9513AG1 | User Guide - Page 29
    contact your dealer, retailer, or other IBM authorized Servicer. Before calling, please have available as much of the following information as possible: 1. Model and serial number from the label on your monitor. 2. Purchase receipt. 3. Description of problem. 4. Computer type and model. 5. System
  • IBM 9513AG1 | User Guide - Page 30
    the stand cover (c) along the top and then slide it backwards and off the stand. 5. Remove the signal cable and the power cord from the monitor by disconnecting the corresponding adapters. Carefully cut the plastic tie to free the power cord and remove the screw holding the power cord clamp. 6. Lay
  • IBM 9513AG1 | User Guide - Page 31
    slots in the back of the monitor and push the cover into place. To obtain the correct cables and/or to get further instructions on installing them, call the IBM HELPCENTER at the above numbers or contact your dealer, retailer, or other IBM authorized Servicer. 25 ITALIANO JAPANESE COMPL & WARR
  • IBM 9513AG1 | User Guide - Page 32
    -Axx) uses a 15-inch TFT LCD. Power consumption figures are for the monitor and the power supply combined. Dimensions Weight Tilt Image Power Input Power Consumption Video Input Communications Supported Display Modes Environment Width: Depth: Height: Forward Tilt: Backward tilt: Viewable Image
  • IBM 9513AG1 | User Guide - Page 33
    , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, that to which the receiver is connected. • Consult an IBM authorized dealer or service representative for help. Properly shielded and grounded cables and connectors
  • IBM 9513AG1 | User Guide - Page 34
    the country in which the equipment will be installed. As an ENERGY STAR® Partner, IBM Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This monitor complies with TCO'95 guidelines. MPRII Hinweise Industry Canada Compliance Statement This product
  • IBM 9513AG1 | User Guide - Page 35
    causing interference to radio and TV communications and to other electrical or electronic equipment. Such cables and connectors are available from IBM authorised dealers. In accordance with EN 50082-1 1992, Performance Criterion A:, it should be noted that in the presence of certain electromagnetic
  • IBM 9513AG1 | User Guide - Page 36
    you acquire the Machine. If you have any questions, contact IBM or your reseller. Machine: IBM 9513 LCD Color Monitors Warranty Period*: 3 years, including backlight • Contact your place of purchase for warranty service information Production Status Each Machine is manufactured from new parts
  • IBM 9513AG1 | User Guide - Page 37
    : • obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own; and where applicable, before service is provided : • follow the problem determination, problem analysis, and service request procedures that IBM or your reseller provide, • secure all programs
  • IBM 9513AG1 | User Guide - Page 38
    ährleistungserklärung, Teilenummer 72H9623. Los términos y condiciones de las garantías en Europa se recogen en la declaración de garantía adjunta del número de pieza IBM 72H9623. Per le condizioni e i termini de garanzia relativi ai paesi europei, consultare l'apposita dichiarazione
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
User Guide
Guide de l’utiliseur
Benutzerhandbuch
Manual del usuario
Manuale per l’utente
Flat Panel Monitor
15.0 inch(381mm)
TFT LCD
1024 x 768 Addressability
16.7 Million Colors
TCO 95
T55A
Type
9513