IBM 9513AG1 User Guide - Page 26

Power Management To benefit from power management, the monitor must be used in conjunction If your computer has with a computer that implements the Video Electronics Standards previously been used with a Association (VESA) Display Power Management Signalling (DPMS) CRT monitor and is currently configured to a display mode Standard. outside the range that the Flat The power management feature is invoked when the computer recognizes Panel monitor can display, you may need to re-attach the CRT monitor that you have not used your mouse or keyboard for a user-definable period. temporarily until you have re- There are several states as described in the table below. configured the computer, preferably to 1024 x 768 at 60Hz. As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. IBM recommends that you switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. State Power Indicator Screen Restoring Operation Compliance On DPMS Standby DPMS Suspend DPMS Off Steady green Normal Steady amber Flashing amber (0.5 sec. interval) Flashing amber (1 sec. interval) Blank Blank Blank Press a key or move the mouse. ENERGY STAR® and NUTEK Press a key or ENERGY STAR® move the mouse. ‡ and NUTEK Press a key or ENERGY STAR® move the mouse. ‡ and NUTEK ‡ There may be a slight delay before the picture reappears. 20