IBM DTNA-22160 Hard Drive Specifications - Page 13
General Features
View all IBM DTNA-22160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2.0 General Features 2.5-inch, 12.5mm Height MCC Compliance 2160MB / 1800MB formatted capacity 512 bytes/sector AT Interface (Enhanced IDE) conforming to ATA-3 Integrated controller No-ID recording format PRML channel Multi Zone Recording Enhanced ECC − On The Fly correction : 6 Bytes/sector − Offline correction : 9 Bytes/sector 96KB Segmented Buffer with Write Cache PIO Data Transfer - Mode 4 (16.6 MB/sec) DMA Data Transfer - Multiword DMA Mode 2 (16.6 MB/sec) Media data transfer rate 61.6(outer zone) - 39.1(inner zone) Mbit/se Average seek time 13 milliseconds for read Closed-loop actuator servo (Embedded Sector Servo) Rotary voice coil motor actuator Automatic Actuator lock Dedicated head landing zone Adaptive power save control (0.85 Watt at low-power idle state) 2.8 sec Power on to ready Shock − Non-operation : 500G/2ms − Operation : 100G/2ms Note: Hole position of mounting screw is different from previous IBM 2.5" HDDs such as DMCA-2xxxx, DCRA-2xxxx, DSOA-2xxxx, DPRA-2xxxx, etc. © Copyright IBM Corp. 1997 5