IBM DTNA-22160 Hard Drive Specifications - Page 39
Safety, Packaging
View all IBM DTNA-22160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5.9 Safety 5.9.1 Underwriters Lab(UL) Approval DTNA-21800/22160 complies with UL 1950. 5.9.2 Canadian Standards Authority(CSA) Approval DTNA-21800/22160 complies with CSA C22.2, #950-M1993. 5.9.3 IEC Compliance DTNA-21800/22160 complies with IEC 950. 5.9.4 German Safety Mark DTNA-21800/22160 are approved by TUV on Test Requirement: EN 60 950:1988/A1:1990/A2:1991. 5.9.5 Flammability Printed Circuit boards used in this product are made of material with a UL recognized flammability rating of V-1 or better. The flammability rating is marked or etched on the board. All other parts not considered electrical components are made of material with a UL recognized flammability rating of V-1 or better except minor mechanical parts. 5.9.6 Secondary Circuit Protection This product utilizes printed circuit wiring that must be protected against the possibility of sustained combustion due to circuit or component failure. Adequate secondary over current protection is the responsibility of the using system. User must protect the drive from it's electrical short circuit problem. 10 A limit is required for safety purpose. 5.10 Packaging Drives will be shipped in appropriate containers and placed on pallets. Drives are shipped in ESD protective bags. Specification 31