IBM x3655 User Guide - Page 45
Installing, adapter
![]() |
UPC - 883436014533
View all IBM x3655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Installing an adapter PCI slot 4 PCI slot 3 PCI slot 2 PCI slot 1 Expansion slot 1 Riser-card assembly Expansion slot cover Expansion slot cover Low-profile PCI Express adapter Adapter The following notes describe the types of adapters that the server supports and other information that you must consider when installing an adapter: v You can install only low-profile adapters in PCI slots 2, 3, and 4 on the system board. v You can install a standard full-length HTX, PCI Express, or PCI-X adapter (25 W maximum) in slot 1 on the riser-card assembly. v Your server supports only 3.3 V and universal PCI adapters. v The PCI bus configuration is as follows: - Non-hot-plug, full-length PCI Express x16 (x16 lanes) or PCI-X 64 bit, 133 MHz, slot 1 - Non-hot-plug, low profile PCI Express x4 (x4 lanes), slot 2 - Non-hot-plug, low profile PCI Express x8 (x8 lanes), slots 3 and 4 v The system scans devices in the following order, if you have not changed the default boot precedence: integrated Ethernet controllers, integrated SAS controller, and then PCI slots 1, 2, 3, and 4. Chapter 2. Installing optional devices 31
![](/manual_guide/products/ibm-x3655-user-guide-e5225f7/45.png)