IC Realtime EL-700 Product Manual - Page 10
mode.There
View all IC Realtime EL-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Functions and operation 8-8. DNR (Dynamic Noise Reduction) The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point to 'DNR' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT and RIGHT buttons. SETUP LENS SHUTTER WHITE BAL. BACKLIGHT AGC CUIL MANUAL ESC.' ATW OFF LOW, EEM OFF : There is no reduction in noise level. LOW : There is a small reduction in noise level with almost no ghost image. MIDDLE : The most effective mode.There is a sufficient reduction in noise. HIGH : The noise is greatly reduced while ghost images are increasing. L-R. NOTE When AGC is turned off, 'DNR' does not operate. 8-9. SENS UP (Low illuminance) SENS UP helps maintain a bright, clear screen image by automatically detecting changes of the level of light in low illumination. 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT and RIGHT buttons. AUTO : Low light level auto mode. OFF : The function does not operate. SETUP LENS SHUTTER WHITE BAL. BACKLIGHT AGC DNR SPECIAL' Ea' NOTE • When the SHUTTER is in the MANUAL mode, SENS UP does not operate. • When the AGC is turned off, SENS UP does not operate. 3. Please press the SET UP button when all the settings are completed. E2r. NOTE • The maximum storage magnification in low light level movement situations can be adjusted by pressing the SETUP button in 'AUTO' mode. (x2-x128) • As the magnification increases, the screen gets brighter, however the ghost images also increases. • If storage magnification is increased while SENS UP is operating, it may cause noise, and spots may appear, however this is normal. 8. Functions and operation 8-10. SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. Camera ID ABCDEU HIJKLM NOPQRSTUVWXYZ abcdefghlJklm nopqrstuvwxyz -. 123456789 --ELR POS END A. CAMERA ID When you enter a CAMERA ID, the camera ID appears on he monitor. 1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN button. 2) Please select 'ON' by pressing the LEFT and RIGHT buttons. r4. NOTE If 'OFF' is selected, the ID does not appear on the monitor even if it has been input. 3) Please press the SETUP button to complete 'ON'. 4) Up to 15 letters are offered for the ID. C) Please move the cursor to the letter to choose by using the UP and DOWN button. Select an ID from A, B,-Y,Z, a,b, -y,z, 0,1,- 8,9 by using the UP, DOWN, LEFT and RIGHT buttons. ® Lock in the letters by using the SETUP button. • When the letter is locked in, the cursor moves to the next space. ® Please repeat the above to input ID. nir NOTE If a wrong name has been input • If you press the SETUP button after moving the cursor to CLR, all the letters will be erased. • If you want to correct a letter, please move the cursor to the arrow at the bottom left of the screen and press the SETUP button. • Please position the cursor above the letter you wish to correct, and then move the cursor onto the letter you wish to choose and press the SETUP button. Back VIcl