IC Realtime EL-700 Product Manual - Page 11
Day&Night
View all IC Realtime EL-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Functions and operation 5) When a name has been chosen, please select a position for the name to display. CD Please move the cursor onto 'POS' and then press the SETUP button. FRONT DOOR Camera ID ABC DEFGHIJKLM NOPQRSTUVWXYZ abodefghtiklm nopqrstuewxy. -. 123456789 -GLR CaND C) The name will appear at the top lef hand corner. C) Please find the position you wish to display the name by using the 4 directional buttons, and then press the SETUP button. 6) Please select 'END' and then press the SETUP button to complete ID input. B. COLOR (Day&Night mode selection) AUTO : This camera has a function which automatically changes to the appropriate mode for daytime or nighttime. The picture displays a Color image in day, and it converts to BW mode at night. SPECIAL CAMERA ID OFF •COLOR ON SYNC INT ON : It is fixed to Color mode and the image is not changeable to BW for night. mr NOTE • When the AGC is OFF, COLOR does not operate. • When an infrared light is used, there may be a problem with focusing. C. SYNC Two SYNCHRONIZATION modes are available INTERNAL and LINELOCK mode, it synchronizes the video signal SYNC between cameras without a synchronous generator. PHASE I 1225 The linelock synchronization is only used in the areas of 60Hz (NTSC)/ 50Hz(PAL). INT : Internal synchronization. LL : External Linelock synchronization. ar NOTE • When the power frequency is 50Hz, you cannot use the line-lock mode (NTSC model). • When the power frequency is 60Hz, you cannot use the line-lock mode (PAL model). • 'SYNC' mode is fixed to 'INT' in DC input power. 8. Functions and operation D. PRIVACY This mode conceals the areas you do not wish to show PRIVACY on the screen. OFF : Cancels the PRIVACY mode. ON : Operates the PRIVACY mode. AREA SEL AREA STATE TOP I DOWN I LEFT 1 RIGHT I AREA4 OFF . 131 160 147 195 • Please press the SETUP button. • Please select the area you do not wish to appear from the 4 areas in AREA SEL mode. • Please select ON mode for the chosen area. • Please adjust the size of the area to be concealed by using the UP, DOWN,LEFT and RIGHT buttons. E. MIRROR ON : Sets a horizontal image inversion. OFF : Cancels the inversion. 4o t vi"Jr.),(1 [ MIRROR ON MIRROR OFF F. SHARPNESS The outline of video image become clearer and more distinctive as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video and generate noise. • Please press the SETUP button. • The available range of level is 0-15. SHARPNESS LEVEL I'"'''''''"115 Press Set to Return G. RESET Returns to the default set by the manufacturer. H. RETURN 1. Save the SPECIAL menu (by pressing the SETUP Button) 2. SPECIAL menu will appear. Then move the cursor to RETURN by using UP/DOWN buttons and press the SETUP button. 3. SET UP menu will appear. I. EXIT Save all setting menus by pressing the SETUP button and then exits by pressing EXIT button.