IC Realtime EL-700 Product Manual - Page 7

8. Functions and operation 8-1. On screen Menu (OSD) I-LENS (Selection) SHUTTER :condition and speed control) NHITE BALANCE control 3LC (Backlight compensation) .GC (Auto Gain Control) SNR (Super Noise Reduction ) BENS-UP (Low Illumination) SPECIAL EXIT SETUP menu MANUAL FLK ATW OFF High OFF HIGH OFF HIGH OFF CAMERA ID SYNC PRIVACY SHARPNESS RETURN P DCNIDEO ESC AWC LOW LOW LOW AUTO COLOR MOTION DET MIRROR RESET MANUAL MIDDLE MIDDLE MIDDLE MIDDLE 8. Functions and operation 8-2. Setting up the menu Settings can be made using the 5 buttons located on the back of the camera. 2 UP button LEFT button DOWN button SETUP button RIGHT button 7v1 ~v eity 6 40,0 00. 1. Press the SET button to access the SETUP mode. The SETUP menu is displayed on the monitor. SETUP SHUTTER UHITE BAL. BACKLIGHT AGE 0HR SENS-UP SPECIAL EXIT ESC J ATU OFF L0U J L0U OFF 2. Please select any function you wish to activate by using the UP/DOWN buttons. The arrow can be moved up or down by using the UP/DOWN buttons. Position the arrow to point to the function you wish to operate. MAIN menu SUB menu .1r SETUP UP button SHUTTER UNITE BAL. BACKLIGHT OKAR SEMS-UP SPECIAL EXIT ESC «I ATU OFF LO0U OFF LEFT button SETUP V DOWN button RIGHT button MAIN-menu : Use UP/ DOWN buttons. / SUB-menu : Use LEFT/ RIGHT buttons. 3. Change the status of the selected feature using the LEFT/RIGHT buttons. When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate. 4. When completed, move the arrow indicator to 'EXIT' and press the SETUP button to finish the setting. ar NOTE • If J appears at the mode you wish to operate, it means that there is a sub-menu which can be selected by pressing the SETUP button. • If «I appears at the mode item, it means that there is no mode available to be selected.