IC Realtime EL-700 Product Manual - Page 8
Functions, operation, Selection
View all IC Realtime EL-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8. Functions and operation 8-3. LENS (Selection) This function is used to select the lens and to adjust the SETUP suitable to the type of lens. ♦ When VIDEO Lens is used. 1. Please move the lens selection switch located on the back of the camera to VIDEO position first. 2. Press the SETUP button. 3. The LENS on the menu will automatically display in the sub-menu. If this sub-menu shows , please press the sub-menu and it will be converted to . aF. NOTE • When VIDEO is selected, the SHUTTER is fixed at 1/60sec (NTCS), 1/50sec (PAL) and the sub-menu at the SHUTTER mode will be a . • When VIDEO lens is selected at the camera's back, DC mode is not display on the screen. ♦ When DC lens is used. 1. Please move the lens selection switch located on the back of the camera to DC position first. 2. Press the SETUP button. SETUP CIECE SHUTTER WHITE BAL. BACKLIGHT IFE ATW OFF 3. The LENS on the menu will automatically display in the sub-menu. If this sub-menu shows , please press the sub-menu and it will be converted to . .BMGHTNESI I I 4. DC Level volume controls Brightness level of the screen o - 70 at mode is adjustable. - Select the SHUTTER menu and move the cursor to the sub-menu . - Press the SETUP button and then the BRIGHTNESS CONTROL menu is on. - Adjust the level by using the LEFT/RIGHT buttons. 5. Press the SETUP button to finish the control. ar NOTE • At DC mode, SHUTTER is fixed at 1/60 sec (NTSC), 1/50 sec (PAL) and the sub-menu at the SHUTTER menu will be a • When DC lens is selected at the camera's back, VIDEO mode is not display on the screen. 8. Functions and operation ♦ When MANUAL lens is used. 1. When Manual lens is used, the menu is automatically converted to mode regardless of the position of VIDEO/DC switch on the camera's back. 2. Press the SETUP button and select on the LENS mode. SETUP SHUTTER WHITE BAL. BACKLIGHT ESCJ ATW OFF 3. Then the sub-menu on the SHUTTER menu is converted to mode. 41-1. 4. Brightness level of the screen at mode is adjustable. - 70 - Select the SHUTTER menu and move the cursor to sub-menu . - Press the SETUP button and then the BRIGHTNESS CONTROL menu is on. - Adjust the level by using the LEFT/RIGHT buttons. 5. Press the SETUP button to finish the control. 8-4. SHUTTER (condition and speed control) Auto or manual control can be selected. 1. Move the arrow to point to 'SHUTTER' by using the UP/DOWN buttons. SETUP LENS SHUTTER MANUAL MANUAL 2. Please select the shutter mode by pressing the LEFT or RIGHT button. FLK : Please select FLK mode when flickering occurs on the screen, due to an imbalance between illumination and frequency. ESC : The shutter speed is controlled automatically according to the brightness of the screen. SETUP LENS leiMMEE WHITE BAL. BACKLIGHT AGC DNR MANUAL REM ATW OFF LOW, LOW Manual : The shutter speed is controlled manually. 3. Please select 'MANUAL' mode if you wish to adjust the shutter manually. - You can select speed from '1/60' to '1/120,000 sec' (NTSC), '1/50' to '1/120,000 sec' (PAL). - Please use this function only when the light level of the surveillance area is fixed all the time. - It is useful when there is used with a special lighting in the surveillance area. 4. Please press the SETUP button when all of the settings are complete.