IC Realtime ICIP-P2012T Product Manual - Page 9

1 INTELLIGENT SPEED DOME INSTALLATION 1.1 Installation Environments Basic Requirement z All installation and operation here should conform to your local electrical safety codes. z Before installation, please open the package and check all the components are included. Please make sure the speed dome installation environment and installation mode can meet your requirement. If there is special requirement, please contact your local retailer for more information. z We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 1.2 Check installation space and installation location intension Please make sure the installation environment has enough space to install the speed dome and its corresponding bracket. Please make sure the ceiling, wall and the bracket can support the speed dome and its corresponding installation component. It shall sustain the 8X weight of the speed dome. 1.3 About cable Please select the cable according to your transmission distance. The minimum video coaxial-cable requirement is: z 75 ohm. z Full cable with copper conductor z 95% knitted copper shield International Model Max Distance (Ft\M) RG59/U 750ft (229m) RG6/U 1,000ft (305m) RG11/U 1,500ft (457m) z Please refer to Appendix 2 for RS485 communication cable information. Select eclectic wire according to your transmission distance: z For 24V AC series product, please refer to Appendix 3. z For 12V DC series product, please refer to Appendix 4. 1.4 Please keep all package material well for future use Please keep speed dome package material well in case you need to send it back to your local retailer or manufacturer for maintenance work. Non-original package material may result in device damage during the transportation. 1