Icom HM-195GB Instructions - Page 3

INSTRUCTIONS w REMOTE-CONTROL MICROPHONE HM-195 series ⁄6 Entering Individual/Group ID qqEnter "INDIVIDUAL ID" or "GROUP ID" in the DSC SETTINGS menu. wwPush [ADD]. • The "INDIVIDUAL ID" or "GROUP ID" entry screen is displayed. In this INSTRUCTIONS, the IC-M423/IC-M424 series is used for an example. • S ome functions and DSC calls may not be usable depending on the transceiver model or version. • Some screen, function name, and softkey name may be different, depending on the transceiver. See the transceiver's manual for detail operation. ⁄7 Deleting Individual/Group ID qqEnter "INDIVIDUAL ID" or "GROUP ID" in the DSC SETTINGS menu. • When no address ID is entered, "No ID" is displayed. In this case, push [MENU] to exit the MENU screen. wwRotate Dial or push to select an ID name, then push [DEL]. eeEnter an ID in the following way: • Select a number using Dial, or Push [ENT] or Dial to set it. • To move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. The first digit is specified as '0' for a Group ID. The first two digits are '0' for any Coast station ID. rrRepeat step e to enter all 9 digits. ttAfter entering, push [ENT] or Dial to set it. • The ID name entry screen is displayed. eePush [OK] to delete the ID, and return to the "INDIVIDUAL ID" or "GROUP ID" list screen. • Push [CANCEL] to cancel it. rrPush [MENU] to exit the MENU screen. yy Enter a 10 digit ID name in the following way: • Select a character using Dial, or Push [ENT] or Dial to set it. • To move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • Push [123] then [!$?] then [ABC] to select a character group. uuAfter entering the ID name, select "FINISH" using Dial, or then push [ENT] or Dial to set it. • The "INDIVIDUAL ID" or "GROUP ID" list screen is displayed. ⁄8 Entering position and time qqEnter "POSITION INPUT" in the DSC SETTINGS menu. wwEdit your latitude and longitude position using Dial, or [∫]/ Select a number using Dial, or Push [ENT] or Dial to set it. • To move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cur- sor is on the 'W' or 'E' position. iiPush [MENU] to exit the MENU screen. eeAfter entering the position, push [ENT] to save it. rrThe UTC time entry screen is displayed, enter the UTC time in the following way: • Select a number using Dial, or Push [ENT] or Dial to set it. • To move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. ttPush [ENT] or Dial to save your position and time. • Return to the "DSC SETTING" screen. ⁄9 Making a Distress Call The Distress call is automatically transmitted every 3.5 to 4.5 minutes, until an acknowledgement is received ('Call repeat' mode), or a DSC Cancel call is made (See ¤1). DDSimple Call qqConfirm no Distress call is being received. wwWhile lifting up the key cover, hold down [DISTRESS] for 3 seconds to transmit the Distress call. • While holding down [DISTRESS], count down beeps sound and both the key and display backlighting blink. • DSC channel (Channel 70) is automatically selected and the Distress call is transmitted. yyAfter receiving an acknowledgment call, push [ALARM OFF], then reply using the microphone. ➥➥ A distress alert contains: • Nature of distress: Selected in step w. • Position information: T he latest GPS or manually entered position is held for 23.5 hours, or until the power is turned OFF. When no GPS receiver is connected, and both position and time have been manually entered, the screen shown below appears. Edit your latitude and longitude position and UTC time as follows: eeAfter transmitting the call, the transceiver waits for an acknowledgment call. • Push [RESEND] to manually transmit the Distress repeat call. • Push then push [INFO] to display the transmitted Distress call information. • Push then push [PAUSE] to pause the 'Call repeat' mode; push [RESUME] to resume it. ➥➥ Push [CHG], then edit your latitude and longitude position and UTC time. • Select a number using Dial, or Push [ENT] or Dial to set it. • To move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. • Select W (West longitude) or E (East longitude) when the cursor is on the 'W' or 'E' position. rrAfter receiving the acknowledgment, push [ALARM OFF] then reply using the microphone. ➥➥ A distress alert default contains: • Nature of distress: Undesignated distress • Position information: T he latest GPS or manually entered position is held for 23.5 hours, or until the power is turned OFF. DDRegular Call qqEnter "DISTRESS CALL" in the DSC CALLS menu. wwSelect the nature of the distress using Dial or then push Dial or [ENT]. • ' Undesignated,' 'Fire,' 'Explosion,' 'Flooding,' 'Collision,' 'Grounding,' 'Capsizing,' 'Sinking,' 'Adrift,' 'Abandoning ship,' 'Piracy' or 'Man Overboard' is selectable. • T he nature of the distress is stored for 10 minutes after a selection is made. eeThe Distress call confirmation screen is displayed. • Rotate Dial or push [Y]/[Z] to see the hidden lines. rrHold down [DISTRESS] for 3 seconds to transmit the Distress call. • While holding down [DISTRESS], count down beeps sound and both the key and display backlighting blink. • The selected nature of the distress is stored for 10 minutes. ttAfter transmitting the call, the transceiver waits for an acknowledgment call. • Push [RESEND] to manually transmit the Distress repeat call. • Push then push [INFO] to display the transmitted Distress call information. • Push then push [PAUSE] to pause the 'Call repeat' mode, push [RESUME] to resume it. ¤0 Canceling a Distress call qqWhile waiting for an acknowledgment call, push [CANCEL]. wwPush [CONTINUE]. • Push [BACK] to return to waiting for an acknowledgement call. eePush [FINISH]. • P ush [EXIT] to return to waiting for an acknowledgement call. rrThe Distress cancel call is transmitted. ttChannel 16 is automatically selected. • Report your situation using the microphone. • After the report, push [EXIT] to return to the normal operating mode. ¤1 Making a Distress Relay ACK (For only USA version) qqWhen a Distress Relay Call is received, beeps sound. Push [ALARM OFF] to stop the beeps. wwPush [ACPT]. • Push [IGN] to ignore the call and return to the normal operating mode. • Push [INFO] to display the Distress Relay Call information. • Push [PAUSE] to pause the countdown. The Distress cancel call is transmitted. eePush [ACK]. • Push [EXIT] to return to the normal operating mode*. *The exit confirmation dialog is displayed. rrThe Distress Relay Acknowledgement confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. ttAfter transmitting the acknowledgement call, Channel 16 is automatically selected. • Push [EXIT] to return to the normal operating mode.* *The exit confirmation dialog is displayed. • Push [RESEND] to resend the acknowledgement.