Icom HM-195GB Instructions - Page 4
Making a Position Report Reply Call
View all Icom HM-195GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
¤2 Making DSC calls To ensure correct operation of the DSC function, make sure you set the squelch correctly. DDMaking an Individual Call qqEnter "INDIVIDUAL CALL" in the DSC CALLS menu. wwSelect or enter the individual address. eeSelect Routine, Safety or Urgency as the call type. NOTE: When a coast station is selected in step w, the voice channel is automatically specified by the coast station. Therefore, skip step r and go directly to step t. rrSelect a intership channel. ttA confirmation screen appears. yyPush [CALL] to transmit the Individual call. uuS tandby on Channel 70 until an acknowledgement is received. • To return to the normal operating mode, push [EXIT].* *Only USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the call. iiWhen the acknowledgement 'Able to comply' is received, beeps sound and the screen below is displayed. Push [ALARM OFF] to stop the beeps, and then select the intership channel specified in step r. • A different intership channel will be automatically selected if the station you called cannot use the channel. • Reply using the microphone. And go to step o. Or, when the acknowledgement 'Unable to comply' is received, beeps sound. Push [ALARM OFF] to stop the beeps. Then push [EXIT] to return to the operating channel (before you entered the MENU screen). ooAfter communicating, push [EXIT] to return to the normal operating mode. DDMaking an Individual Acknowledgement Quick ACK: qqWhen an Individual call is received, beeps sound. Push [ALARM OFF] to stop the beeps. wwPush [ACK]. eeSelect one of three options, Able to Comply, Unable to Com- ply or Propose New Channel, and then push [ENT]. rrThe Individual ACK confirmation screen is displayed. ttPush [CALL] to transmit the acknowledgement call. yyReply to the call using the microphone. uuPush [EXIT] to return to the normal operating mode.* *Only USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the acknowledgement. Manual ACK: qqEnter "INDIVIDUAL ACK" in the DSC CALLS menu. • When no Individual call has been received, the "Individual ACK" item will not be displayed. wwSelect an individual address or ID code to reply to, using Dial or then push [ENT]. eePerform steps e to u, as described in "Quick ACK:" above. DDMaking a Group Call qq Enter "GROUP CALL" in the DSC CALLS menu. wwSelect or enter the group address. eeSelect an intership channel. rrA confirmation screen appears. ttPush [CALL] to transmit the Group call. yyAnnounce the information using the microphone. uuAfter the announcement, push [EXIT] to return to the normal operating mode.* *O nly USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the call. DDMaking an All Ships Call qqEnter "ALL SHIPS CALL" in the DSC CALLS menu. wwSelect a category. • The selectable category may differ according to the connected transceiver setting. eeSelect a traffic channel. rrA confirmation screen appears. ttPush [CALL] to transmit the All Ships call. yyAnnounce the message using the microphone. uuAfter the announcement, push [EXIT] to return to the normal operating mode.* *O nly USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the call. DDMaking a Position Request Call qqEnter "POSITION REQUEST" in the DSC CALLS menu. wwSelect or enter an individual address. eeA confirmation screen appears. • Confirm the call contents. rrPush [CALL] to transmit the Position Request Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. ttWhen the acknowledgement call is received, beeps sound. yyPush [ALARM OFF] to stop the beeps, and then push [EXIT] to return to the normal operating mode.* *O nly USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the call. DDMaking a Position Report Call qqEnter "POSITION REPORT" in the DSC CALLS menu. wwSelect or enter an individual address. eeA confirmation screen appears. • Confirm the call contents. rrPush [CALL] to transmit the Position Report Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. ttAfter the Position Report Call has been transmitted, the transceiver automatically returns to the normal operating mode. DDTransmitting a Polling Request Call qqEnter "POLLING REQUEST" in the DSC CALLS menu. wwSelect or enter an individual address. eeA confirmation screen appears. • Confirm the call contents. rrPush [CALL] to transmit the Polling Request Call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. ttWhen the acknowledgement call is received, beeps sound. yyPush [ALARM OFF] to stop the beeps, and then push [EXIT] to return to the normal operating mode.* *O nly USA version, the exit confirmation dialog is displayed, and then push [RESEND] to resend the call. ¤2 Making DSC calls (Continued) DDTransmitting a Test Call qq Enter "TEST CALL" in the DSC CALLS menu. wwSelect or enter an individual address. eeA confirmation screen appears. rrPush [CALL] to transmit the Test call. ttWhen the acknowledgement call is received, beeps sound. yyPush [ALARM OFF] to stop the beeps, and then push [EXIT] to return to the normal operating mode. DDMaking a Position Report Reply Call Quick Reply: qqWhen a Position Report Request call is received, beeps sound. Push [ALARM OFF] to stop the beeps. DDMaking a Test Acknowledgement Call Quick ACK: qqWhen a Test call is received, beeps sound. Push [ALARM OFF] to stop the beeps. wwPush [ACK]. • Push [INFO] to display the Test call information. P ush [BACK] to return to the previous screen, or push [ACK]. eeThe Test ACK confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. rrAfter transmitting the acknowledgement call, the transceiver returns to the normal operating mode. Manual ACK: qqEnter "TEST ACK" in the DSC CALLS menu. • If no Test call has been received, the "TEST ACK" item will not be displayed. wwSelect a Test call to reply to, using Dial or then push Dial or [ENT]. eeThe Test ACK confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. rrAfter transmitting the acknowledgement call, the transceiver returns to the normal operating mode. DDMaking a Position Reply Call Quick Reply: qqWhen a Position Request call is received, beeps sound. Push [ALARM OFF] to stop the beeps. wwPush [ACK]. • Push [INFO] to display the Position Report Request call information. Push [BACK] to return to the previous screen, or push [ACK]. eeThe Position Report Reply confirmation screen is displayed. Push [CALL] to transmit the reply call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. Manual Reply: qqE nter "POSITION REPORT REPLY" in the DSC CALLS menu. • If no Position Report Request call has been received, the "PO- SITION REPORT REPLY" item will not be displayed. wwSelect a Position Report Request call to reply to, using Dial or then push Dial or [ENT]. eeThe Position Report Reply call confirmation screen is dis- played. Push [CALL] to transmit the acknowledgement call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. DDTransmitting a Polling Reply Call Quick Reply: qqWhen a Polling Request call is received, beeps sound. Push [ALARM OFF] to stop the beeps. wwPush [ACK]. • Push [INFO] to display the Position Request call information. P ush [BACK] to return to the previous screen, or push [ACK]. eeThe Position Reply confirmation screen is displayed. Push [CALL] to transmit the reply call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. Manual Reply: qqEnter "POSITION REPLY" in the DSC CALLS menu. • If no Position Request call has been received, the "POSITION REPLY" item will not be displayed. wwSelect a Position Request call to reply to. eeThe Position Reply call confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. wwPush [ACK]. • Push [INFO] to display the Polling Request call information. P ush [BACK] to return to the previous screen, or push [ACK]. eeThe Polling Reply confirmation screen is displayed. Push [CALL] to transmit the reply call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. Manual Reply: qq Enter "POLLING REPLY" in the DSC CALLS menu. • If no Polling Request call has been received, the "POLLING REPLY" item will not be displayed. wwSelect a Polling Request call to be replied. eeT he Polling Reply call confirmation screen is displayed. Push [CALL] to transmit the acknowledgement call. rrAfter transmitting the reply call, the transceiver returns to the normal operating mode. +See "Instructions q" (z to ⁄5) or "Instructions e" (¤3 to ‹1) for other functions. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Apr. 2021 A7022D-2EX-3 Printed in Japan © 2012-2021 Icom Inc.