Icom HM-195GB Instructions - Page 8

‹4 Configurations (Continued) DDInactivity Timer Set the inactivity timer to between 1 and 10 minutes (in 1 minute steps) or OFF for the "Not DSC Related" and "DSC Related" item, and set to between 1 and 15 minutes (in 1 minute steps) or OFF for the "DSC Related" item. The count down alarm sounds 10 seconds before the Inactive timer returns the current screen to the normal operating screen. qqWhen the "INACTIVITY TIMER" screen is displayed, rotate Dial or push to select "Not DSC Related" or "DSC Related," and then push [ENT]. wwRotate Dial or push to select the option, and then push [ENT] to set it is displayed next to the selected option. eePush [EXIT] to exit the Menu screen. • Push [CLEAR] or [BACK] to return to the previous screen. • Not DSC Related When the LCD displays a screen other than the normal op- eration screen, or one not related to the DSC, and no key operation occurs for this set period, the transceiver auto- matically returns to the normal operating screen.  (Default: 10 min) DDNMEA Output Select the Data Output function option for a NMEA output port. • POS data output When receiving position data from an external GPS receiver, this function sends the data from the NMEA Output port to an external device. (Default: OFF) • DSC data output When receiving a DSC call, this function sends the DSC data from the NMEA Output port to an external device. (Default: OFF) All Stations: O utputs the call from any vessel from the NMEA Output port. Station List: O utputs the call from any vessels listed on the Individual ID screen. OFF: Does not output any call to an external device. • DSC Related When the LCD displays the screen related to the DSC, and no key operation occurs for this set period, the transceiver automatically returns to the normal operating screen.  (Default: 15 min) DDRemote ID Set a Remote ID number to between 1 and 69. The Remote ID is included in the sentence of the Icom original NMEA format. (Default: 15) • RT Related (For only USA version.) While receiving or transmitting a signal, and when the chan- nel is changed, the RT (Radio Telephone) icon is displayed. The icon disappears if you push no key for the period of time set in the Menu screen shown below. (Default: 30 sec) +See "Instructions q" (z to ⁄5), "Instructions w" (⁄6 to ¤2), or "Instructions e" (¤3 to ‹1) for other functions. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan May 2020 A7022D-4EX-4 Printed in Japan © 2013-2020 Icom Inc.