Icom IC-7600 Instruction Manual - Page 50
◇ Contest number set mode, Number, Style, Normal, Count, Trigger, Present
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4 RECEIVE AND TRANSMIT D Contest number set mode This menu is used to set the contest (serial) number and count-up trigger, etc. • Setting contents q D uring CW mode operation, push [KEYER] (F-3) to select memory keyer screen. w P ush [EXIT/SET] to select memory keyer menu, then push [001] (F-3) to select contest serial number set mode. e P ush [Y] (F-1) or [Z] (F-2) to select the desired set item. r Set the desired condition using the main dial. • Push and hold [DEF] (F-4) for 1 sec. to select the default condition or value. t Push [EXIT/SET] twice to normal screen. • Contest number set mode screen KEYER / 001 F-3 DEF / 001CLR F-4 F-1 F-2 EXIT/SET Main dial Number Style This item sets the numbering system used for contest (serial) numbers- normal or short morse numbers. Short morse numbers are also referred to as "cut" numbers. Normal • Normal : Does not use short morse numbers (default) • 190➔ANO : Sets 1 as A, 9 as N and 0 as O. • 190➔ANT : Sets 1 as A, 9 as N and 0 as T. • 90➔ NO : Sets 9 as N and 0 as O. • 90➔ NT : Sets 9 as N and 0 as T. Count Up Trigger The count-up trigger allows the contest serial number to automatically increment after each complete serial number exchange is sent. M2 • M1, M2, M3 and M4 can be set. (default: M2) Present Number This item shows the current number for the count-up trigger channel set above. 001 • Rotate the main dial to change the number, or push and hold [001CLR] (F-4) for 1 sec. to reset the current number to 001. 43