Icom IC-7600 Instruction Manual - Page 73
◇ Fixed Mode, Exit/set], Scope] F-1, Cent/fix] F-5, Att] F-2, Marker] F-3, Hold] F-4
![]() |
View all Icom IC-7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4 RECEIVE AND TRANSMIT D Fixed mode Displays signals within the specified frequency range. Conditions on the selected frequency band can be observed at a glance when using this mode. q P ush [EXIT/SET] several times to close a multi- function screen, if necessary. w Push [SCOPE] (F-1) to select the scope screen. e P ush [CENT/FIX] (F-5) several times to select the fixed mode. • " " is displayed when fixed mode is selected. r P ush [ATT] (F-2) several times to activate an attenuator or turn the attenuator OFF. • 10, 20 and 30 dB attenuators are available. • Push and hold [ATT] (F-2) for 1 sec. to turn OFF the attenuator. t P ush [MARKER] (F-3) several times to turn the marker for transmit frequency and/or sub readout frequency ON or OFF. • " " displays the marker at the transmit frequency. • " " displays the marker at the sub readout frequency. • " " displays the marker at the main readout fre- quency. (always displayed) • "" appears when the marker is out of range. • The spectrum scope shows the transmit signal while transmitting. This can be deactivated in scope set mode. (p. 68) • The spectrum scope shows the peak level hold func- tion. Peak levels are displayed in the background of the current spectrum in a different color. This can be deac- tivated and the waveform color can be set in scope set mode. (p. 68) y P ush [HOLD] (F-4) to freeze the current spectrum waveform. • " " appears while the function is in use. • Push and hold [HOLD] (F-4) to clear the current spec- trum waveform. u Push [EXIT/SET] to exit the scope screen. NOTE: If a strong signal is received, a ghost signal may appear. Push [ATT] (F-2) several times to activate the spectrum scope attenuator in this case. The scope bandwidth can be specified for each frequency band independently in scope set mode. (pgs. 69 to 71) HOLD F-4 CENT/FIX F-5 F-1 F-2 F-3 EXIT/SET SCOPE / SPAN ATT MARKER Appears 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 66
![](/manual_guide/products/icom-ic7600-instruction-manual-4a9b24c/73.png)