Icom IC-7600 Instruction Manual - Page 98

5 VOICE RECORDER FUNCTIONS ■ Recording a received audio Up to 20 receive voice memories are available in the IC-7600. A total of 209 sec. of audio can be recorded in receive messages. However, the maximum recordable length of a single message is 30 sec. This voice recorder records not only the received audio, but also the information such as set operating frequency, mode, and the recording time for your future reference. D Basic recording q P ush [EXIT/SET] several times to close a multifunction screen, if necessary. w S elect the desired mode. e P ush [VOICE] (F-2) to call up the voice recorder screen. • Previously selected screen, TX or RX memory, is dis- played. If the TX memory channel (T1-T4) appears, push [T/R] (F-6) to select RX memory channel. r P ush and hold [REC] for 1 sec. to start recording. • The operating frequency, mode and current time are programmed as the memory names automatically. t P ush [REC] momentarily to stop recording. IMPORTANT! Push [REC] to stop recording before, or when 30 sec. has elapsed from the start of recording. The voice recorder memory records 30 sec. (max.) of audio before [REC] is pushed. For example, when recording 40 sec. of audio, the first 10 sec. audio will be over-written with the last 10 sec., so that the total of audio recorded is only 30 sec. When you record the 21st audio message, or when the total audio length exceeds 209 sec., the oldest recorded audio is automatically erased to make room for the new audio. y P ush [EXIT/SET] twice to exit the voice recorder screen. NOTE: When transmit (or [PTT] is pushed) while recording, no audio will be recorded. D One-touch recording To record the received signal immediately, one-touch voice recording is available. ➥ P ush [REC] momentarily to store the previous 15 sec. audio. • The recordable time period can be set in voice set mode. (p. 97) 91 F-2 VOICE F-6 EXIT/SET REC T/R The remaining time for recording is indicated. REC