Icom IC-F3161D Instruction Manual - Page 11

PANEL DESCRIPTION 2 ■ Programmable function keys 1 y BELL INDICATOR 2 The following functions can be assigned to [EMR], [Side1],  Appears/blinks when the matched signal is received, ac- [Side2], [Side3], [P0], [P1], [P2] and [P3] programmable 3 cording to the pre-programming. u CALL CODE MEMORY INDICATOR  Appears when the call code memory is selected. i BATTERY INDICATOR function keys. Consult your Icom dealer or system operator for details con- 4 cerning your transceivers programming. 5 If the programmable function names are bracketed in the following explanations, the specific key is used to activate the 6  Appears or blinks when the battery power decreases to a function depends on the programming. 7 specified level. Indication Battery level Full Middle Charging required No battery CH UP AND DOWN KEYS "UP" "DOWN" 8 ➥ Push to select an operating channel. When [Rotary selec- 9 tor] selects "operating channel," this key is not available. ➥ P ush to select a transmit code channel after pushing 10 blinks when the battery is over charged. blinks when the battery is exhausted. [TX Code CH Select]. 11 ➥ Push to select a DTMF channel after pushing [DTMF Au- todial]. 12 o ALPHANUMERIC DISPLAY ➥ P ush to select a scan group after pushing and holding 13  ➥ Displays an operating channel number, channel name, Set mode contents, DTMF code, etc. [Scan]. ➥ Push to select the desired application type, individual/talk- 14 ➥ The indication mode can be selected from 1 line or 2 lines. Ask your dealer for details. • In this instruction manual, the LCD illustration is described group ID, TX status message and SDM (Short Data Message) after pushing [Digital Button]. 15 16 using the 2 lines indication mode. !0 KEY INDICATOR  Indicate the programmed function of the front panel keys ([P0], [P1], [P2] and [P3]). 6