Icom IC-F3161D Instruction Manual - Page 21

BASIC OPERATION 3 ■ User set mode ■ Scrambler function 1 The User Set mode allows you to set seldom-changed set- The voice scrambler function provides private communica- 2 tings. If the transceiver has [User Set Mode] assigned to it, tion between stations. All versions have a built-in frequency 3 you can "customize" the transceiver operation to suit your preferences and operating style. inversion type scrambler; however, an optional rolling or nonrolling type is available as well. 4 5 Entering the User Set mode: q P ush and hold [User Set Mode] to enter the User Set ➥ Push [Scrambler] to toggle the scrambler function ON or OFF. 6 mode. w P ush [User Set Mode] several times to select the appro- • " " (Scrambler indicator) appears when the function is ON. 7 priate item. Then push [CH Up] or [CH Down] to set the 8 desired level/condition. • In the User Set mode, the selectable items are preset by your ■ Stun function 9 dealer. The presetable items are Backlight, LCD contrast, When the specified ID, set as a stun ID or kill ID, is received, 10 Beep, Beep Level, Ringer Level, SQL Level, AF Min Level, Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal the stun function is activated. When the stun ID is received, the transceiver becomes unus- 11 Moni, Lone Worker and System Info. * Appears only when the external VOX unit is connected. e P ush and hold [User Set Mode] again to exit the User Set mode. able. Entering of the password (p. 11) or receiving a specified ID, set as a revive ID, is necessary to operate the transceiver again in this case. When the kill ID is received, the transceiver switches to the 12 13 14 cloning required condition. Cloning the transceiver is neces- sary to operate the transceiver again in this case. 15 16 16