Icom IC-F3161D Instruction Manual - Page 12

2 PANEL DESCRIPTION ZONE KEY "ZONE" Push this key, then push [CH Up] or [CH Down] to select the desired zone. When [Rotary selector] selects "operating zone," this key operation is not available. What is "zone"?- Selected channels are assigned to a zone according to how they are to be used in a group. For example, 'Staff A' and 'Staff B' are assigned into a "Business" zone, and 'John' and 'Cindy' are assigned into a "Private" zone. ZONE UP AND DOWN KEYS "ZNUP" "ZNDN" Push to select an operating zone. When [Rotary selector] selects "operating zone," this key is not available. SCAN KEY "SCAN" ➥ Push to start and cancel scanning operation. • When Power ON Scan function is activated, push to pause the scanning operation. And the paused scan restarts after the specified time period has passed. ➥ Push and hold this key for 1 sec. to indicate the scan list, then push [CH Up] or [CH Down] to select the desired list. SCAN ADD/DEL (TAG) KEY "SCAD" ➥ Push to add channel to, or delete it from the current scan group. 1. Push to indicate the scan group, then push [CH Up] or [CH Down] to select the desired group. 2. Push to add or delete the channel to/from the selected scan group. 3. Push and hold for 1 sec. to exit the scan group selection mode. ➥ P ush this key while scan is paused (a signal is detected) on a channel (except for priority channel,) the channel is cleared from the scan group. Depending on the setting, the cleared channel is added to the scan group again after the scan is cancelled. (Nuisance Delete function) PRIORITY CHANNEL KEYS "PRA" "PRAR" "PRB" "PRBR" ➥ Push to select Priority A or Priority B channel. ➥ P ush and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to rewrite the Priority A or Priority B channel for the operating channel. 7