Icom IC-M200 Instruction Manual - Page 11

The Microphone Lock function, Backlight brightness level, The AquaQuake function

Get Icom IC-M200 PDF manuals and user guides View all Icom IC-M200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

BASIC OPERATION 3 ■■The Microphone Lock function ■■The AquaQuake function 1 The Microphone Lock function locks and You can use the AquaQuake function to clear water 2 [HI/LO] on the supplied microphone. The function away from the speaker grill. The function helps drain 3 prevents from accidentally changing channels or water away from the speaker housing by emitting a 4 functions. zz W hile holding down [HI/LO] on the microphone, turn vibrating noise. 5 ON the transceiver to toggle the Microphone Lock zz W hile holding down [▲] and [▼] on the transceiver 6 function ON or OFF. at the same time, turn ON the transceiver. ••A low beep sounds while you hold both [▲] and [▼] to 7 drain water, regardless of [VOL] level setting. 8 L W hile the AquaQuake function is ON, key operations are disabled. 9 L " " scrolls. 10 ■■Backlight brightness level 11 12 The display and keys can be backlit for better visibility under low light conditions. 13 zz W hile holding down [SCAN], push [▲] or [▼] 14 to adjust the brightness of the display and key backlight. 15 L The brightness level is selectable in 3 levels, or OFF. 16 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
3
8
3
BASIC OPERATION
16
15
14
13
12
11
10
9
8
7
6
5
4
2
1
■
The Microphone Lock function
■
Backlight brightness level
■
The AquaQuake function
The Microphone Lock function locks [▲], [▼], and
[HI/LO] on the supplied microphone. The function
prevents from accidentally changing channels or
functions.
z
While holding down [HI/LO] on the microphone, turn
ON the transceiver to toggle the Microphone Lock
function ON or OFF.
The display and keys can be backlit for better visibility
under low light conditions.
z
While holding down [SCAN], push [▲] or [▼]
to adjust the brightness of the display and key
backlight.
L
The brightness level is selectable in 3 levels, or OFF.
You can use the AquaQuake function to clear water
away from the speaker grill. The function helps drain
water away from the speaker housing by emitting a
vibrating noise.
z
While holding down [▲] and [▼] on the transceiver
at the same time, turn ON the transceiver.
• A low beep sounds while you hold both [▲] and [▼] to
drain water, regardless of [VOL] level setting.
L
While the AquaQuake function is ON, key operations
are disabled.
L
“
” scrolls.