Icom IC-M200 Instruction Manual - Page 15
Set Mode
View all Icom IC-M200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
6 SET MODE ■■Set mode 1 In the Set mode, you can change the settings of the transceiver's functions. DDSet mode sequence 2 3 NOTE: Available functions may differ depending on the dealer setting. Ask your dealer for details. • Scan type • Scan resume timer 4 5 6 DDSet mode operation 1. Turn OFF the transceiver. 2. While holding down [16/C], turn ON the transceiver. ••Enters the Set mode. 7 Starts with this item 8 • Dual/Tri-watch 9 Push 10 ••"SCAN" is displayed. 11 3. Push [16/C] several times until your desired item is selected. 12 4. Push [▲] or [▼] to change the setting. 5. Turn OFF the transceiver, then ON again to exit the Set mode. • FAV on MIC • Key Beep 13 14 15 16 Scrolls 12
5
6
12
16
15
14
13
12
11
10
9
8
7
4
3
2
1
SET MODE
6
■
Set mode
In the Set mode, you can change the settings of the
transceiver’s functions.
NOTE:
Available functions may differ depending on
the dealer setting. Ask your dealer for details.
D
Set mode operation
1.
Turn OFF the transceiver.
2.
While holding down [16/C], turn ON the
transceiver.
•
Enters the Set mode.
•
“SCAN” is displayed.
3.
Push [16/C] several times until your desired item is
selected.
4.
Push [▲] or [▼] to change the setting.
5.
Turn OFF the transceiver, then ON again to exit
the Set mode.
D
Set mode sequence
• Key Beep
• Scan type
• Scan resume timer
• Dual/Tri-watch
• FAV on MIC
Scrolls
Starts with this item
Push