Icom IC-M200 Instruction Manual - Page 22

10 SPECIFICATIONS AND OPTIONS ■■Specifications General ••Frequency coverage: Transmit 156.025~162.000 MHz Receive 156.025~162.025 MHz ••Type of emission : FM (16K0G3E) ••Antenna impedance : 50 Ω nominal ••Operating temperature range: -20°C to +60°C ••Power supply voltage (negative ground): 13.8 V DC ••Current drain (at 13.8 V): TX (at 25 W) 5.5 A maximum Maximum audio 1.5 A maximum ••Dimensions: 153(W) × 67(H) × 133(D) mm ••Weight (approximately): 790 g Transmitter ••Rated output power: 25 W (High) and 1 W (Low) ••Modulation: Variable reactance frequency modulation ••Maximum frequency deviation: ±5.0 kHz ••Frequency tolerance: ±5.0 ppm ••Spurious emissions: Less than -70 dBc (High) Less than -56 dBc (Low) ••Adjacent channel power: More than 70 dB ••Audio harmonic distortion (at 60% deviation): Less than 10% ••Residual modulation: More than 40 dB 19 Receiver ••Intermediate frequencies: 1st 21.7 MHz, 2nd 450 kHz ••Sensitivity (12 dB SINAD): -121 dBm typical ••Squelch sensitivity: Less than -117 dBm ••Audio power output (at 10% distortion into 4 Ω): 4.5 W typical ••Adjacent channel selectivity: More than 70 dB ••Spurious response: More than 70 dB ••Intermodulation: More than 70 dB ••Hum and noise: More than 40 dB ■■Options ••MB-69 flush mount kit ••MB-92 dust cover Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to the Icom transceiver, if the malfunction is because of: ••Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. ••The use of Icom transceivers with any equipment that is not manufactured or approved by Icom.