Icom IC-M73 Instruction Manual - Page 20
This function electronically
View all Icom IC-M73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4 BASIC OPERATION ■The Call channel key is used to select Channel 9* by default. Hyinooeuwarecmvheocrs,htyaoonfutneecnla-gnurspoerudopgcfrhoaarmnqnueicl k recall. * The channel may differ, depending on the transceiver version. qqHold down for 1 second several times to select the desired channel group (USA, INT, CAN, ATIS) to be programmed. wwHold down for 1 second to select the Call channel. • "CALL" and Call channel number appear. eeHold down again for 3 seconds (until a long beep changes to 2 short beeps) to enter the Call channel programming mode. • The Call channel number to be programmed blinks. rrPush YZ to select the desired channel. ttPush to program the displayed 12 channel as the Call channel. • The Call channel number stops blinking. ■This function electronically lporcekvsenatllakcecyidse(enxctepat lforc, hanad )ntnoel changes and function access. ➥ Push for 1 second to turn the lock function ON or OFF. Hold down for 1 second Appears while the lock function is in use. ■The monitor function releases the noise squelch mute to cphaegcek2t7hfeovr odleutmaielsleovfetlh.eSee monitor switch action. ➥ Hold down for 1 second to activate the monitor function. • "" and "" appear and audio is heard. Hold down for 1 second Appears while the monitor function is in use.