Icom IC-M73 Instruction Manual - Page 33

8 SET MODE ■ SET mode programming The SET mode is used to change the status of 17 transceiver functions†: Beep tone function, Weather alert function†, Priority scan, Scan resume timer, Auto scan start function, Dual/ Tri-watch function, Monitor key action, Display backlight, LCD contrast selection, Power save function, Scroll type selection, Scroll speed selection, RX noise cancel function†, TX noise cancel function†, RX bass boost function†, TX bass boost func- DDSET mode operation 1 qqTurn OFF power. wwWhile holding down [ ], turn ON power to enter the 2 SET mode. 3 • The "BEEP" (Beep tone function setting) appears. eePush [ ], or push [ ] and [Y]/[Z] to select the de- 4 sired item. 5 rrPush [Y]/[Z] to select the desired option of the item. ttTo exit the SET mode, push [16/C]. 6 tion† and the Automatic recording threshold level selection†. DDSET MODE ITEMS 7 Beep tone function* Weather alert function† Priority scan† Scan resume timer† 8 Auto scan start function† 9 10 Automtic recording threshold level selection† Dual/Tri-watch 11 function† 12 TX bass : Push [ ], or while holding down [ ], push [Y] Monitor key action 13 boost function† : While holding down [ ], push [Z] 14 *Starting item †Depending on versions Display backlight 15 RX bass boost function† LCD contrast 16 selection TX noise cancel function† RX noise cancel function† Scroll speed selection Scroll type selection Power save function 25