Icom IC-M73 Instruction Manual - Page 28
Play back function Depending on versions
![]() |
View all Icom IC-M73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
7 FUNCTION MODE OPERATION ■ P lay back function (Depending on versions) This transceiver has two voice recorders. One is the manual recording function which can record for 30 seconds. The other is the automatic recording function which can record the last 60 seconds of the receiving signal. There are three play-back modes as follows. • Playing back the all contents of the manual recording Select "M-PLAY" Playing back for 30 seconds (maximum). • Playing back the last 30 seconds of the automatic recording Select "LAST30S" Not playing back. Playing back for 30 seconds (maximum). • Playing back the all contents of the automatic recording Select "LAST60S" Playing back for 60 seconds (maximum). 20 qqPush [F] to enter the function mode. • "PLAY" appears. wwPush [H/L•LOCK] to enter the play back selection mode, and then push [Y]/[Z] to select the desired play back mode from "M-PLAY," "LAST30S," or "LAST60S." If there is no recorded signal in the transceiver, "BLANK" appears. • M-PLAY : Play back the manually recorded signal. • LAST30S : Play back the last 30 seconds of the automaticaliy recorded signal. • LAST60S : Play back the automaticaliy recorded signal for 60 seconds. eePush [H/L•LOCK] to play back the recorded signal. • "PL" blinks. • To stop the play back, push [H/L•LOCK] again. Blinks while playbacking. Playback mode appears. DO NOT detach the battery pack while the transceiver is turned ON. Otherwise, the data could be lost or deleted. "BLANK" appears when the transceiver has no recorded signal. Deleting a recorded signal: While selecting the desired data to delete, hold down [FAV•★] for 3 seconds until 2 short beeps sound.
![](/manual_guide/products/icom-icm73-instruction-manual-e3d8f11/28.png)