Icom IC-R20 Instruction Manual - Page 30
Basic Operation
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4 BASIC OPERATION ■ Receiving Make sure charged battery pack (BP-206) or brand new alkaline batteries are installed (p. 8). q Push [POWER] for 1 sec. to turn power ON. wRotate [L-DIAL] (or push [Y] or [Z]) to set the desired audio level. • The frequency display shows the volume level while setting. See the section at right for details. e Set the receiving frequency. (p. 14) r Set the squelch level. (p. 18) • While pushing [SQL], rotate [R-DIAL]. • The first click of [R-DIAL] indicates the current squelch level. • "LEVEL 1" is loose squelch and "LEVEL 9" is tight squelch. • "AUTO" indicates automatic level adjustment with a noise pulse count system. • Push and hold [SQL] to open the squelch manually. tWhen a signal is received: • Squelch opens and audio is emitted. • The S-meter shows the relative signal strength level. r Push for setting the squelch (Push to monitor) w Set audio level e Set frequency r Set squelch level w Set audio level 17 q [POWER] e Select band ■ Setting audio volume The audio level can be adjusted through 39 levels. ➥ Push and hold [SQL], rotate [L-DIAL] (or push [Y] or [Z]) to adjust the audio level. • While using [Y]/[Z], pushing and holding either key change the audio level continuously. • The display shows the volume level while setting. [L-DIAL] SQL -DUP TSQL AFC MODE FM ANL 146 010 √ VOL PSKIP Minimum setting (no audio) √ VOL √ VOL Maximum setting