Icom IC-R20 Instruction Manual - Page 46

6 MEMORY CHANNELS ■ Erasing/transferring bank contents The bank contents of programmed memory channels can be cleared or reassigned to another memory bank. INFORMATION: Even if the memory bank contents are cleared, the memory channel contents still remain programmed. qSelect the desired bank contents to be transferred or erased from the bank. ➥ Push [MR S.MW] to select memory mode. ➥ While pushing [BAND], rotate [R-DIAL] to select the desired memory bank group. ➥ Rotate [R-DIAL] to select the bank channel. wPush [MR S.MW] for 1 sec. to enter the select memory write condition. • 1 short and 1 long beeps sound. • Displays the original memory channel number automatically and "µ " indicator blinks. • Do not hold [MR S.MW] for more than 2 sec., otherwise the memory contents will be copied to VFO. ePush [8 SET] once to select "BANK." • While pushing [8 SET] then rotate [R-DIAL] also selectable "BANK." rWhile pushing [BAND], rotate [R-DIAL] to select the desired bank group to be transfer. • Select "- - - -" indication when erasing the contents from the bank. When transferring When erasing FM 145..700µ >BANK-:R-00 -BNAME: -MNAME: -SKIP-:OFF >CLEAR 028 FM 145..700µ >BANK-:----BNAME: -MNAME: -SKIP-:OFF >CLEAR 028 t Rotate [R-DIAL] to select the desired bank channel. y Push [MR S.MW] for 1 sec. MR Push S.MW for 1 sec. -DUP TSQL AFC MODE FM ANL 145 700 B:GROUP1 PSKIP √ µ A93 ATT FM 145..700µ 642 -BANK-:A-93 -BNAME:OSAKA -MNAME: -SKIP-:OFF >CLEAR 33