Icom IC-R20 Instruction Manual - Page 72
DCI-V address DCI-V baud rate DCI-V transceive
View all Icom IC-R20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
10 SET MODE D CI-V address To distinguish equipment, each CI-V transceiver/receiver has its own Icom standard address in hexadecimal code. The ICR20's address is "6C." When 2 or more IC-R20s are connected to an optional CT-17 CI-V LEVEL CONVERTOR, set a different address for each IC- R20 in the range "01" to "7F." (default: 6C) CI-V-ADDRESS 6C CI-V-ADDRESS 01 CI-V address set to 6C CI-V address set to 01 D CI-V baud rate Sets the data transfer rate. When "AUTO" is selected, baud rate is automatically set according to the connected controller or other Icom CI-V radio. (default: AUTO) CI-V-BAUD-RATE 300bps -1200bps -4800bps -9600bps -19200bps >AUTO CI-V-BAUD-RATE 300bps -1200bps -4800bps >9600bps -19200bps -AUTO "AUTO" baud rate setting 9600 bps setting D CI-V transceive CI-V transceive operation is possible with the IC-R20 con- nected to an Icom CI-V radio. When "ON" is selected, chang- ing the frequency, operating mode, etc. on the IC-R20 automatically changes those of connected radios and vice versa. (default: ON) CI-V-TRANSCEIVE OFF -ON CI-V-TRANSCEIVE OFF >ON CI-V transceive OFF CI-V transceive ON 59