Icom ID-1 Instruction Manual - Page 67
Offset frequency setting
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
8 REPEATER OPERATION- VOICE Offset frequency setting D Setting from the application qDisplays set mode screen by performing one of the following operations. - Select "Edit SetMode(C)..." in view menu. - Click " " button in tool bar. - Click [SET]. - Press [F7] key on the PC keyboard. wDouble click "Offset Freq" frequency cell, then enter the desired frequency within 0 to 60.000 MHz range. • To close the screen, click " " or repeat the operation as step q. Double click, then enter the desired offset frequency. D Setting from the RC-24 q Push [MODE] several times to select FM mode. w Push [TXinh• ] for 0.5 sec. to enter set mode. ePush [MODE] or [TXinh• ] to select "Offset Fre- quency" item. r Rotate [DIAL] to set the desired offset frequency. • The tuning step, previously selected in VFO mode, is used for the setting. t Push [PWR] momentarily to exit set mode. 8 [DIAL] [TXinh• ] [MODE] 12.000 Offset Frequency 60