Icom M37 Instruction Manual - Page 12

3 PANEL DESCRIPTION ■■ Front, top and side panels 1 11 5 SCAN/DUAL KEY [SCAN]/[DUAL] ••Push to start or stop a scan. (p. 15) ••Hold down for 1 second to start the Function display 10 Dual/Tri-watch mode. (p. 16) LL While in Dualwatch, push to cancel Dualwatch. LL Tri-watch may start, depending on the 2 Set mode settings. 9 ••Hold down both [SCAN] and [Hi/Lo] for 1 second to turn ON the AquaQuake 3 function. (p. 12) 8 6 POWER KEY [ ] Hold down for 1 second to turn the 4 7 transceiver ON or OFF. 5 6 7 TRANSMIT POWER/LOCK KEY [Hi/Lo]/[ ] Speaker ••Push to set the power level to High or Low. Microphone LL Some channels are set to only Low power. ••Hold down for 1 second to lock or 1 SPEAKER/MIC JACK [SP/MIC] unlock the keypad. (p. 23) 8 CHANNEL/WEATHER CHANNEL*1 Connect the optional HM-213 speaker KEY [CH/WX]/[U/I/C] or [CH] microphone here. ••Push to switch between a regular 2 PTT SWITCH [PTT] Hold down to transmit, release to receive. 3 CHANNEL 16/CALL CHANNEL KEY channel and weather channel.*1 (p. 10) ••Push to select a regular channel.*2 ••Hold down for 1 second to change the channel group. (p. 9) [16/C] (p. 9) NOTE: [CH] is described as [CH/WX] ••Push to select Channel 16. or [U/I/C] in this instruction manual. ••Hold down for 1 second to select the Call channel. 9 FAVORITE CHANNEL KEY [FAV] (p. 15) 4 VOLUME/SQUELCH/MONITOR KEY [VOL/SQL]/[MONI] ••Push once to display the volume level ••Push to select a Favorite channel. ••Hold down for 1 second to set or clear the selected channel as a Favorite channel. setting screen. 10 UP/DOWN KEYS [▲]/[▼] ••Push twice to display the squelch level ••Push to select the operating channel. setting screen. (p. 12) ••Push to change the volume/squelch ••Hold down for 1 second to turn ON the level while adjusting. monitor function. ••In the Set mode, push to select an item option. 11 ANTENNA CONNECTOR (p. 2) Connect the supplied antenna here. *1 For the USA, EXP, and AUS versions *2 For the EUR, FRG, HOL, and UK versions 4