Icom M37 Instruction Manual - Page 26

8 SET MODE ■■ Set mode items NOTE: The Set mode items contained in Auto Scan " " the transceiver may be different, depending (Except the HOL version) on the transceiver's version or presettings. Ask your dealer for details. Turns the Automatic Scan function ON or OFF. OFF: The function is OFF. Beep " " ON: Scan automatically starts when no signal is received, or no operations Turns the Key Beep function ON or OFF. are carried out for 30 seconds. OFF: Turns OFF the function for silent operation. ON: When a key is pushed, a beep sounds. Dual/Tri-watch " " (Except the HOL version) Selects Dualwatch or Tri-watch. WX Alert " " d- (Dual): Periodically checks Channel 16 (For the USA, EXP, and AUS versions) Turns the Weather Alert function ON or OFF. LL See page 10 for details. OFF: The transceiver does not detect a while operating on another channel. t- (Tri): Periodically checks Channel 16 and the Call channel while operating on another channel. Weather Alert tone. ON: The transceiver detects the Weather Alert tone, and the " " icon blinks and a beep sounds. LL The blinking stops when another key is pushed. SQL Key Action " " The function temporarily opens the squelch. Pu (Push): The Monitor function is activated by holding down [VOL/SQL] for more than 1 second. The squelch opens while holding down the key. Scan Type " " Ho (Hold): The Monitor function is activated (Except the HOL version) by holding down [VOL/SQL] Turns the Priority Scan function ON or OFF. OFF: T he scan type is set to "Normal," which sequentially searches all Favorite for more than 1 second. The squelch stays open until the user pushes any key. channels in the channel group. ON: The scan type is set to "Priority," which sequentially searches all Favorite channels in the channel group, while also periodically checking Channel 16 (Priority channel). Backlight " " Turns the Automatic Backlight function ON or OFF. OFF: The function is OFF. ON: The backlight turns ON for 5 seconds when the user pushes any key Scan Timer " " except [PTT]. (Except the HOL version) Contrast " " Turns the Scan Resume Timer ON or OFF. OFF: W hen a signal is detected on a channel, the scan pauses until the signal disappears, and then resumes. ON: When a signal is detected on a channel, the scan pauses for 5 seconds, and then resumes. If the signal disappears Selects the transceiver's display contrast. Hi: The transceiver's display contrast is set to High. Lo: T he transceiver's display contrast is set to Low. Power Save " " in less than 5 seconds, the scan Turns the Power Save function ON or OFF. immediately resumes. OFF: The function is OFF. ON: The Power Save function reduces current drain by deactivating the receiver circuit of the transceiver at 18 specified intervals.