Icom M37 Instruction Manual - Page 2
Important, Explicit Definitions, Features, In Case Of Emergency, Recommendation, Dusing Channel 16 - m37e
View all Icom M37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Thank you for choosing this Icom product. This product was designed and built with Icom' s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. ■■ IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL - This instruction manual contains important operating instructions for the IC-M37/IC-M37E. ■■ EXPLICIT DEFINITIONS WORD DEFINITION Personal death, serious RDANGER! injury or an explosion may occur. Personal injury, fire hazard RWARNING! or electric shock may occur. CAUTION Equipment damage may occur. If disregarded, NOTE inconvenience only. No risk of personal injury, fire or electric shock. ■■ FEATURES zz 6 W*1 RF output power zz Powerful 700 mW audio output for clear communication zz Float'n Flash: Floats and flashes on the water zz IP57*2 dust protection and waterproof construction *1 5 W for the AUS version. *2 Only when the supplied battery pack or case, antenna, and jack cover are attached. ■■ IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. DDUSING CHANNEL 16 1. Push [16/C] to switch to Channel 16. 2. While holding down [PTT], give the appropriate information as follows: zz "MAYDAY MAYDAY MAYDAY." zz "THIS IS " (name of vessel). zz Say your call sign or other indication of the vessel (AND your 9 digit DSC ID, if you have one). zz "LOCATED AT " (your position). zz State the nature of the distress and assistance required. zz Give any other information which might facilitate the rescue. ■■ RECOMMENDATION CLEAN THE TRANSCEIVER AND MICROPHONE THOROUGHLY WITH FRESH WATER after exposure to saltwater, and dry it before operating. Otherwise, the transceiver's keys, switches and controllers may become unusable, due to salt crystallization. NOTE: If the transceiver's waterproof protection appears defective, carefully clean it with a soft, wet (fresh water) cloth, then, dry it before operating. The transceiver may lose its waterproof protection if the case or microphone is cracked or broken, the microphone connector is not screwed in completely, or the transceiver has been dropped. Contact your Icom distributor or your dealer for advice. i