Icom M93D Instruction Manual - Page 13
Software Key Function Display, Call Channel Icon
View all Icom M93D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PANEL DESCRIPTION 3 r STATUS ICON i CHANNEL NUMBER READOUT 1 ••"STBY" is displayed while not receiving nor transmitting. •• "RT" (Radio Telephone mode) is displayed while Displays the selected operating channel number. L"A" is displayed when a simplex channel is selected. 2 receiving or transmitting a signal or when the squelch o CALL CHANNEL ICON (p. 11) 3 opens. (p. 13, 56) ••"DSC" is displayed while in the DSC mode. Displayed when a Call channel is selected. !0 FAVORITE CHANNEL ICON (p. 17) 4 t CHANNEL NAME Displayed when a Favorite channel is selected. 5 ••The channel name is displayed, if entered. (p. 15) ••"SCAN" or "SCAN 16" is displayed while scanning. (p. 16) !1 MAIL ICON (p. 40) ••Displayed when there is an unread message. 6 ••"DUAL 16" or "TRI 16" is displayed while using the ••Blinks until one of the call messages is read. 7 Dualwatch or Tri-watch function. (p. 18) y POSITION/TIME INDICATOR !2 DSC SWITCH ICON (p. 42) ••Displayed when the "CH Auto Switch" is set to "Ignore" 8 Displays the current position and time when valid GPS or "Manual" 9 data is received, or when manually entered. Received GPS data blinks if no GPS data is received for 30 seconds after receiving valid GPS data, and then "??" and a warning message ••Blinks when the "DSC Switch" is OFF. !3 BATTERY INDICATOR Displays the battery's remaining power. 10 11 are displayed alternately after 10 minutes. Indication 12 ••A warning message is displayed if no GPS data is received for 4 hours after receiving valid GPS data. Battery level Full Mid Charging Battery required exhausted 13 ••"No Position No Time" is displayed if no GPS data is received for 2 minutes after turning ON the transceiver, and then a blinks when the battery is overcharged (or over voltage) 14 warning message is displayed. !4 GPS ICON 15 L"Local" is displayed when the UTC Offset time is set. (p. 21) Manually entered GPS data: ••Stays ON while valid GPS position data is received. ••Blinks while no position data is received. 16 ••A manually entered GPS data is valid for 4 hours, and then a warning message is displayed after 4 hours. L"Manual" is displayed. !5 CHANNEL GROUP ICON ••The selected Channel Group's icon is displayed. ••"WX" is displayed for the Weather channel in the USA, u SOFTWARE KEY FUNCTION DISPLAY (p. 7, p. 14) Australian, and Export versions. (p. 12) ••The software key functions are displayed. ••"Key Locked" is displayed while the Lock function is ON. 6