Icom M93D Instruction Manual - Page 72

14 SPECIFICATIONS AND OPTIONS ■■Specifications IC-M93D DDGeneral • Frequency coverage: TX 156.025 ~ 157.425 MHz RX 156.050 ~ 163.275 MHz • Mode: FM (16K0G3E), DSC (16K0G2B) • Operating temperature range: -20°C ~ +60°C (-4°F ~ +140°F) • Current drain (approximately): Tx (5 W) 1.5 A Tx (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) • Power supply requirement: 7.2 V DC nominal (negative ground) • Frequency stability: ±10 ppm • Antenna impedance: 50 ˘ nominal • Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm (Projections not included) 2.2 (W) × 5.7 (H) × 1.5 (D) inches • Weight (approximately): 265 g/9.3 oz with BP-285 DDTransmitter • O utput power: 5 W/1 W • Modulation system: Variable reactance frequency modulation • Maximum frequency deviation: ±5.0 kHz • Adjacent channel power: 70 dB • Spurious emissions (typical): -68 dBc DDReceiver • Sensitivity (typical): 0.25 µV (12 dB SINAD) • Squelch sensitivity (threshold, typical): 0.25 µV • Intermodulation rejection ratio: 70 dB (typical) • Spurious response rejection ratio: 70 dB (typical) • Adjacent channel selectivity: 70 dB (typical) • Audio output power (at 10% distortion): 0.35 W typical (External) with an 8 ˘ load 0.9 W typical (Internal) with a 12 ˘ load at 1 kHz IC-M93D EURO DDGeneral • Frequency coverage: TX 156.000 ~ 161.450 MHz (156.000 ~ 161.600 MHz for Dutch version) Rx 156.000 ~ 163.425 MHz • Mode: FM (16K0G3E), DSC (16K0G2B) • Operating temperature range: -15°C ~ +55°C • Current drain (approximately): TX (5 W) 1.5 A TX (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) • Power supply requirement: 7.2 V DC nominal (negative ground) • Frequency stability: ±1.5 kHz • Antenna impedance: 50 ˘ nominal • Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm (Projections not included) • Weight (approximately): 265 g with BP-285 65