Icom M93D Instruction Manual - Page 38
Sending a Test Acknowledgement, to return to the operating screen.
View all Icom M93D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
8 DSC OPERATION DDSending a Test Acknowledgement By default, when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to "Manual," do the following steps to send an Acknowledgement. 1. After a Test call is being received, push any software key to turn OFF the alarm. 2. Push the software key below [ACPT]. ••The received call's information is displayed. LIf you want to send an "Able to comply" Acknowledgement right away, push the software key below [ABLE]. 4. Push the software key below [CALL] to send the Acknowledgement. ••"Transmitting Test ACK" is displayed. 5. Push the software key below [EXIT]. ••A confirmation screen is displayed. 6. Push the software key below [OK] to return to the operating screen. 3. Push the software key below [ACK]. ••The "Test ACK" confirmation screen is displayed. 31