Icom M93D Instruction Manual - Page 28
Entering the position and time
View all Icom M93D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
8 DSC OPERATION ■■Entering the position and time A Distress call should include the vessel's position and time. If no GPS data is received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE: ••The manual entry is disabled while the GPS data is received. ••The manually entered position and time is valid only for 4 hours, or until turning OFF the transceiver. 1. Display the "Position Input" screen. [MENU] ► "DSC Settings" ► "Position Input" 2. Enter the latitude and longitude. TIP: ••Select a number or a compass direction using Push [ENT] to enter the selected number. ••Select "←" or "→," to move the cursor. ••Push the software key below [NEXT] to change the entry between latitude, longitude, and UTC. 3. Push the software key below [NEXT] to start entering the UTC time. LUse the TIP in step 2 to enter. 4. Push the software key below [DONE] to set the entered position and time. ••Returns to the previous screen. LThe entered position and time are displayed on the operating screen. L"Manual" is displayed next to the time display. 21