Icom M93D Instruction Manual - Page 73

SPECIFICATIONS AND OPTIONS 14 1 DDTransmitter • Output power: 5 W/1 W • Modulation system: Variable reactance frequency modulation • Maximum frequency deviation: ±5 kHz • Adjacent channel power: 70 dB • Spurious emissions: 0.25 µW 2 • Power supply requirement: 7.2 V DC nominal (negative ground) 3 • Frequency stability: ±10 ppm (-10°C ~ +55°C) • Antenna impedance: 50 ˘ nominal 4 • Dimensions (approximately): 57 (W) × 144.6 (H) × 38.5 (D) mm (Projections not included) 5 • Weight (approximately): 265 g/9.3 oz with BP-285 6 DDReceiver DDTransmitter 7 • Sensitivity (typical): -6 dBµ emf at 20 dB SINAD • O utput power: 5 W/1 W 8 • Squelch sensitivity (threshold, typical): -6 dBµ emf • Modulation system: Variable reactance frequency modulation 9 • Intermodulation rejection ratio: 68 dB • Spurious response rejection ratio: 70 dB • Maximum frequency deviation: ±5.0 kHz • Adjacent channel power: 70 dB 10 • Adjacent channel selectivity: 70 dB • Spurious emissions (typical): 0.25 µW 11 • Audio output power (at 10% distortion): 0.2 W (External) with an 8 ˘ load 0.9 W typical (Internal) with a 12 ˘ load at 1 kHz IC-M93D EURO (Australian version) DDGeneral • Frequency coverage: TX 156.025 ~ 157.425 MHz DDReceiver • Sensitivity (typical): -6 dBµ emf (20 dB SINAD) • Squelch sensitivity (threshold, typical): -6 dBµ emf • Intermodulation rejection ratio: 65 dB • Spurious response rejection ratio: 65 dB • Adjacent channel selectivity: 65 dB 12 13 14 15 16 RX 156.300 ~ 162.025 MHz • Audio output power (at 10% distortion): • Mode: FM (16K0G3E), DSC (16K0G2B) 0.2 W (External) with an 8 ˘ load • Operating temperature range: -10°C ~ +55°C 0.9 W typical (Internal) with a • Current drain (approximately): TX (5 W) 1.5 A 12 ˘ load at 1 kHz TX (1 W) 0.7 A RX maximum audio 0.25 A (External) 0.45 A (Internal) 66