Icom SAT100 Operating Manual - Page 21
Troubleshooting
![]() |
View all Icom SAT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
9 TROUBLESHOOTING Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION The transceiver does ••The battery is exhausted. ••Recharge the battery pack. not turn ON. ••The battery pack is not correctly attached. ••Correctly reattach the battery pack. REF. p. 6 p. 2 Little or no sound comes from the speaker. You cannot transmit. You cannot use the keypad. No beep sounds. ••Volume level is set too low. ••The battery is exhausted. ••An obstacle may exist between the satellite and transceiver. ••The Key Lock function is ON. ••The Key beep is set to OFF. ••The audio output level is low. ••Adjust the volume level. p. 4 ••Recharge the battery pack. p. 6 ••Retry transmitting in a place without p. 7 obstacles. ••Push [P2] until "Lock OFF" is displayed p. 4 to turn OFF the function. ••Adjust the key beep level in the Menu p. 4 screen. ([OK] > Beep/Vibration > Key Beep Lv) ••Rotate [VOL] to adjust the audio output p. 4 level. 19
![](/manual_guide/products/icom-sat100-operating-manual-e3aeb20/21.png)