Icom SAT100 Operating Manual - Page 8
Battery Charging - cable
![]() |
View all Icom SAT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3 BATTERY CHARGING Battery charger NOTE: ••Before attaching or detaching a battery pack, BE SURE to turn OFF the transceiver by rotating [VOL] fully counter clockwise until it makes a "click" sound. Otherwise, a transceiver malfunction could occur. ••BE SURE to remove the transceiver from the charger while operating the transceiver. DDSupplied battery charger Charging time: Approximately 3.1 hours for the BP-300 Turn OFF Power adapter* Battery pack Battery charger Charging indicator Lights orange: Charging Lights green: Charged Blinks red: When a charging error has occurred. * May not be supplied, or the shape may be different, depending on the transceiver version. NOTE: If the charging indicator alternately blinks green and orange, remove the battery pack or the transceiver from the charger, then reinsert it. If the charging indicator still alternately blinks green and orange, ask your dealer for details. DDExtend Battery Life function The charger has the Extend Battery Life function switch on the bottom panel. ••OFF: The battery is fully charged. The operating time of the transceiver is maximum. ••ON: The battery is not fully charged to not shorten the battery life cycle. LLThe battery life cycle is extended. But the operating time of the transceiver becomes shorter. DDMicro USB Connector You can also use the Micro USB Connector to charge instead of the supplied battery charger. LLAn USB cable that compatible with more than 2.0 A is required (User supplied). LL" " is displayed while charging. LLCharging time may longer than using a battery charger. 6
![](/manual_guide/products/icom-sat100-operating-manual-e3aeb20/8.png)