Icom SAT100 Operating Manual - Page 9

Basic Operation

Get Icom SAT100 PDF manuals and user guides View all Icom SAT100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4 BASIC OPERATION Receiving and transmitting D Turning ON the transceiver z Rotate [VOL] to turn ON the transceiver. • The transceiver searches for a satellite. • When the transceiver is connected and registered to a satellite, the status "IDLE," transceiver name, and Talkgroup name are displayed. L Rotate Talkgroup selector to select a Talkgroup. L Push [Last Call] to playback the received call. (p. 9) L Push [UP] or [DOWN] to display the Talkgroup List. D Receiving When receiving, "LISTENING," and the source transceiver's name is displayed, and audio should be heard. • When a source transceiver stops transmitting and receiving is finished, the transceiver sounds the beep "Pi" and displays "OPENˮ. L Rotate [VOL] to adjust the audio output level. 00:00 LISTENING TRANSCEIVER 02 TALKGROUP01 Last Call Ignore D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Hold down [PTT]. • "REQUESTING" is displayed while the transceiver requests a transmission. 2. When "TALKING" is displayed, speak at your normal voice level. L You can continuously transmit up to the period of time allowed by the system. 00:00 TALKING TRANSCEIVER 01 TALKGROUP01 Last Call Ignore NOTE: • If the connection becomes poor while transmitting, the transceiver sounds the beep "PuPu" in 1.5 seconds interval. Keep the antenna vertical, or move your position to the place with a clear view of the sky. • You cannot transmit while listening to the received audio. Before transmitting, confirm the receiving is finished by the beep "Pi" and the display "OPEN." *If you push [PTT] while receiving, the transceiver sounds the beep "PiPiPiPiPi" and displays "BUSY." D Scan and Ignore [Scan] Push to scan a call. [Ignore] Push to ignore a received call. L The Ignore function will be canceled if there are no more calls for 90 seconds or longer. NOTE: • The transceiver receives and transmits using several satellites in the same orbit. Receiving and transmitting may fail, depending on the satellite position or any obstacles between the transceiver and the satellites. • Your body can also be an obstacle. Do not hook the transceiver on your waist. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
7
4
BASIC OPERATION
Receiving and transmitting
D
Turning ON the transceiver
z
Rotate [VOL] to turn ON the transceiver.
• The transceiver searches for a satellite.
• When the transceiver is connected and registered to
a satellite, the status “IDLE,” transceiver name, and
Talkgroup name are displayed.
L
Rotate Talkgroup selector to select a Talkgroup.
L
Push [Last Call] to playback the received call. (p. 9)
L
Push [UP] or [DOWN] to display the Talkgroup List.
D
Receiving
When receiving, “LISTENING,” and the source
transceiver’s name is displayed, and audio should be
heard.
• When a source transceiver stops transmitting and
receiving is finished, the transceiver sounds the beep “Pi”
and displays “OPENˮ.
L
Rotate [VOL] to adjust the audio output level.
Last Call
Ignore
00:00
LISTENING
TRANSCEIVER 02
TALKGROUP01
D
Transmitting
CAUTION: DO NOT
transmit without an antenna.
1. Hold down [PTT].
• “REQUESTING” is displayed while the transceiver
requests a transmission.
2.
When “TALKING” is displayed, speak at your
normal voice level.
L
You can continuously transmit up to the period of
time allowed by the system.
Last Call
Ignore
00:00
TALKING
TRANSCEIVER 01
TALKGROUP01
NOTE:
• If the connection becomes poor while transmitting, the
transceiver sounds the beep “PuPu” in 1.5 seconds
interval. Keep the antenna vertical, or move your position
to the place with a clear view of the sky.
• You cannot transmit while listening to the received audio.
Before transmitting, confirm the receiving is finished by
the beep “Pi” and the display “OPEN.”
*If you push [PTT] while receiving, the transceiver sounds
the beep “PiPiPiPiPi” and displays “BUSY.”
D
Scan and Ignore
[Scan]
Push to scan a call.
[Ignore]
Push to ignore a received call.
L
The Ignore function will be canceled if there are no more
calls for 90 seconds or longer.
NOTE:
• The transceiver receives and transmits using several satellites in the same orbit. Receiving and transmitting may
fail, depending on the satellite position or any obstacles between the transceiver and the satellites.
• Your body can also be an obstacle. Do not hook the transceiver on your waist.