Image Fitness 10.6q English Manual - Page 15
How To Use A Custom Program
![]() |
View all Image Fitness 10.6q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
5 Press the RECORD button and program the desired speed and incline settings. HOW TO USE A CUSTOM PROGRAM When the RECORD button is pressed, the indicator on the button will light. Speed and incline settings can be programmed only when the indicator on the button is lit. Refer to the LED matrix. Each custom program is divided into one-minute segments. One speed setting and one incline setting can be programmed for each one-minute segment. The speed setting of the first segment is shown in the flashing column of the LED matrix. (The incline settings are not shown in the LED matrix.) To program the desired speed and incline settings for the first segment, simply adjust the speed and incline of the treadmill to the desired levels with the SPEED and INCLINE buttons. Every few times the SPEED Ò+Ó or ÒÐÓ button is pressed, an additional LED will light or darken in the flashing column. When the first one-minute segment of the program is completed, the current speed setting and the current incline setting will be stored in memory. All columns in the LED matrix will then move one position to the left, and the speed setting of the second segment will be shown in the flashing column. Program speed and incline settings for the second segment as described above. 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 9. 2 Select one of the custom programs. To select one of the custom programs, press the CUSTOM PROGRAM 1 or CUSTOM PROGRAM 2 button. The letters ÒCP 1Ó or ÒCP 2Ó will appear in the SPEED/ PACE display to show which program is selected. When a custom program is selected, the LED matrix will show the speed settings of the program. If the program is more than twenty minutes long, only the first nineteen settings will be shown. The first column will be flashing. Note: Every few seconds, the words ÒPRESS STARTÓ will scroll across the LED matrix. 3 Enter your weight and age if desired. It is not necessary to enter your weight and age to use a custom program; however, the CALORIES display will be more accurate if these numbers are entered. To enter you weight and age, refer to step 3 on page 10. If you have already entered your weight and age, or if you do not want to enter this information, go to step 4. Repeat this procedure until you have programmed speed and incline settings for as many segments as desired. Custom programs can have from one to forty segments. When you are finished, hold down the STOP button for two seconds. The speed and incline settings you programmed and the number of segments will then be stored in memory. To use the program again, see HOW TO USE A CUSTOM PROGRAM at the right. Note: To pause the program temporarily while you are programming speed and incline settings, press the STOP button once. All displays will pause and the TIME display will begin to flash. To restart the program, press the START button. 6 Remove the key from the console. When the program has ended, remove the key from the console. All displays and indicators on the console will darken. 4 Press the START button. Press the START button to start the program. After a moment, the walking belt will begin to move. Hold the handrails and begin walking. Refer to the LED matrix. Each custom program is divided into oneminute segments. One speed setting and one incline setting are programmed for each segment. The speed setting of the first segment is shown in the flashing column of the LED matrix. The speed settings of the next six segments are shown in the six columns to the right. (The incline settings are not shown in the program display.) 15
![](/manual_guide/products/image-fitness-106q-english-manual-62edacc/15.png)